20-A1.1k · Define displacement, velocity, and acceleration qualitatively and quantitatively
Learn to define displacement, velocity, and acceleration qualitatively and quantitatively through clear examples and targeted practice.
Alberta Grade 11 Physics
Kinematics
Alberta Physics 20 expectation 20-A1.1k
Start by choosing what is moving and how its motion will be described. In the examples, the physical system is a person or object whose motion is being studied. The reference frame is the chosen set of positions used to describe that motion; here, it is a straight path beside a fixed origin. We choose the direction to the right as positive. Left is therefore negative. A different choice of positive direction would change signs, but not the actual motion. A scalar has magnitude only, such as elapsed time. A vector has both magnitude and direction. Displacement, velocity, and acceleration are vectors. Their signs show direction along our chosen one-dimensional path.
What you will learn
Describe displacement, velocity, and acceleration in words.
Distinguish vector quantities from scalar quantities.
Calculate displacement, average velocity, and average acceleration using SI units.
Interpret positive and negative signs using a stated reference frame.
1. Position and displacement
Position tells where an object is relative to the origin in the chosen reference frame. In one dimension, we can represent position with a signed coordinate. For example, a position of −3.0m means three metres to the left of the origin when right is positive.
Displacement describes the change in position. It points from the starting position directly to the ending position. It does not describe the total path travelled. If someone walks forward and then returns to the starting point, their total distance is not zero, but their displacement is zero.
The quantitative definition is final position minus initial position. Use metres for position and displacement. A positive displacement points in the positive direction; a negative displacement points in the opposite direction. Displacement is a vector, so its direction matters.
Δx=xf−xi
Displacement depends on the starting and ending positions, not the route between them.
Keep the sign convention consistent from start to finish.
Distance travelled and displacement are different quantities.
2. Velocity
Velocity describes how quickly position changes and in what direction. Average velocity is the displacement divided by the elapsed time. Its SI unit is metres per second, written as m/s. Since displacement has direction, average velocity is a vector.
A positive average velocity means the object’s net displacement is in the positive direction. A negative average velocity means it is in the opposite direction. A zero average velocity means the ending position equals the starting position. It does not necessarily mean the object stayed still during the whole time.
Speed is different: it describes how quickly distance is covered and has no direction. In this lesson, use average velocity when the question gives positions and elapsed time. The time interval must be positive and measured in seconds.
vˉ=ΔtΔx
Average velocity uses displacement, not total distance.
The sign of velocity gives direction in the chosen frame.
Use seconds and metres to obtain velocity in metres per second.
3. Acceleration
Acceleration describes how velocity changes over time. Average acceleration is the change in velocity divided by the elapsed time. Its SI unit is metres per second squared, written as m/s2. Acceleration is a vector because a change in velocity has a direction.
An object accelerates if its velocity changes in magnitude, direction, or both. In one dimension, a positive acceleration points in the positive direction and a negative acceleration points in the negative direction. Do not assume that negative acceleration always means slowing down. If velocity and acceleration have opposite signs, the magnitude of velocity decreases; if their signs match, it increases.
Calculate the change in velocity by subtracting initial velocity from final velocity. Keep each velocity’s sign. Then divide by the elapsed time. This gives average acceleration over that time interval; it does not claim that acceleration was unchanged at every moment.
aˉ=Δtvf−vi
Acceleration is about change in velocity, not simply motion.
A negative sign indicates direction, not automatically a decrease in speed.
Use the same positive direction for both velocity values.
Using signs and units carefully
Before calculating, identify the object, reference frame, positive direction, known values, and unknown. Convert values to SI units when needed. For one-dimensional motion, show direction with a plus or minus sign. For motion in more than one dimension, a vector also needs a stated direction or components; the examples here use a straight path.
A motion graph can show hypothetical position readings over time. A straight sloping line on a position–time graph represents a steady average rate of position change across the plotted interval. The slope’s sign indicates direction. The graph is a schematic representation of the stated values, not experimental evidence.
Check the result before reporting it. Displacement should have units of metres, velocity should have units of metres per second, and acceleration should have units of metres per second squared. Ask whether the sign and size agree with the described motion. Round only after the calculation, to a sensible number of significant figures.
State the frame and positive direction before interpreting signs.
Write units in substitutions and in final answers.
A graph or sketch helps organize information but is not evidence of a real measurement.
Worked example
1. Finding displacement
A student’s position changes from xi=+2.0m to xf=−5.0m along a straight hallway. Right is positive. Find the displacement.
Position change along a hallway
Schematic: the final position lies left of the initial position.
Set the frame
The system is the student. Use the hallway as the reference frame and right as positive. The initial and final positions are signed coordinates.
Apply the definition
Displacement is final position minus initial position. A negative result means the displacement points left.
Δx=(−5.0m)−(+2.0m)=−7.0m
Check
The student ends seven metres left of the starting point, so the direction and magnitude are reasonable. The unit is metres.
Answer: The displacement is −7.0m, or 7.0m left.
Check: The final position is left of the initial position, so a negative displacement matches the chosen sign convention.
Worked example
2. Finding average velocity
A small cart moves along a straight track. Its position changes from +1.0m to +13.0m in 4.0s. Treat the values as hypothetical. Find its average velocity.
Cart moving in the positive direction
Schematic path; the numerical readings are hypothetical.
Hypothetical position readings
The plotted points are hypothetical values from the example, not measured evidence.
Identify values
The cart is the system, the track is the reference frame, and right is positive. The unknown is average velocity. First find displacement and use the elapsed time.
Calculate displacement
Subtract the initial position from the final position.
Δx=(+13.0m)−(+1.0m)=+12.0m
Calculate average velocity
Average velocity is displacement divided by elapsed time. The positive sign indicates motion in the chosen positive direction.
vˉ=4.0s+12.0m=+3.0m/s
Check
The cart’s position increases, so positive velocity is expected. Metres divided by seconds gives metres per second. The result is an average over the full interval.
Answer: The average velocity is +3.0m/s, in the positive direction.
Check: A change of twelve metres over four seconds gives three metres per second. The sign agrees with the increasing position.
Worked example
3. Finding average acceleration
A cyclist moves along a straight path, with forward chosen as positive. The cyclist’s velocity changes from +2.0m/s to +8.0m/s in 3.0s. Find average acceleration.
Velocity and acceleration point forward
Schematic direction diagram; arrow lengths are not to scale.
Set the direction
The cyclist is the system and the path is the reference frame. Forward is positive. Both stated velocities are positive.
Find the velocity change
Subtract initial velocity from final velocity, retaining both signs.
Δv=(+8.0m/s)−(+2.0m/s)=+6.0m/s
Calculate average acceleration
Divide the velocity change by elapsed time. The positive result means acceleration points forward.
aˉ=3.0s+6.0m/s=+2.0m/s2
Check
The cyclist’s forward velocity increases, so forward acceleration is reasonable. Dividing metres per second by seconds gives metres per second squared.
Answer: The average acceleration is +2.0m/s2, forward.
Check: The velocity increases by six metres per second in three seconds. The positive sign and unit are consistent with the motion.
Common mistakes and how to avoid them
Using total distance instead of displacement to calculate average velocity.
Correction: Find final position minus initial position. Distance travelled does not include direction.
Assuming a negative velocity means the object is slowing down.
Correction: A negative velocity shows direction only. Compare velocity and acceleration signs to decide whether velocity’s magnitude is increasing or decreasing.
Calling a change in position per time acceleration.
Correction: Position change per time gives average velocity. Average acceleration uses change in velocity divided by time.
Dropping signs when subtracting velocities.
Correction: Write final velocity minus initial velocity with each sign before calculating.
Lesson summary
Displacement is the change in position: final position minus initial position.
Average velocity is displacement divided by elapsed time. It has units of metres per second.
Average acceleration is change in velocity divided by elapsed time. It has units of metres per second squared.
These quantities are vectors. Their signs indicate direction relative to the chosen positive direction.
Check your understanding
Question 1
A person starts at x=+4.0m and ends at x=+1.0m. Right is positive. What is the displacement?
+3.0m
−3.0m
+5.0m
−5.0m
Show answer and explanation
−3.0m
Displacement is final minus initial position: +1.0m−(+4.0m)=−3.0m. The negative sign means left.
Question 2
An object has an average velocity of −2.0m/s for 5.0s. What is its displacement?
−10m
+10m
−0.40m
+0.40m
Show answer and explanation
−10m
Rearrange average velocity as displacement equals average velocity multiplied by time. The result is (−2.0m/s)(5.0s)=−10m.
Question 3
Velocity changes from −6.0m/s to −2.0m/s in 2.0s. What is average acceleration?
−4.0m/s2
+4.0m/s2
−2.0m/s2
+2.0m/s2
Show answer and explanation
+4.0m/s2
The velocity change is (−2.0)−(−6.0)=+4.0m/s. Dividing by 2.0s gives +2.0m/s2.
Key terms
Position
An object's location relative to a chosen origin in a reference frame.
Reference frame
The chosen positions and directions used to describe motion.
Displacement
The vector change from an object's initial position to its final position.
Average velocity
Displacement divided by elapsed time, including direction.
Average acceleration
Change in velocity divided by elapsed time, including direction.
Tutor support for 20-A1.1k · Define displacement, velocity, and acceleration qualitatively and quantitatively
Working on 20-A1.1k · Define displacement, velocity, and acceleration qualitatively and quantitatively in Physics 20? Bring the question and your own attempt. In a live session, you can represent the quantities clearly, explain the operation you chose, and estimate whether the answer is reasonable. Ask about the first step that does not make sense, then try a similar question yourself.
برای مبحث 20-A1.1k · تعریف کیفی و کمی جابهجایی، سرعت و شتاب در درس Physics 20، سؤال و تلاش خود را همراه بیاورید. در جلسه میتوانید کمیتها را روشن نمایش دهید، دلیل انتخاب عمل را توضیح دهید و معقول بودن پاسخ را برآورد کنید. راهنمای معلم فیزیک را ببینید یا جلسهٔ معارفهٔ رایگان ۳۰ دقیقهای درخواست کنید. زمان جلسه پس از پذیرش معلم قطعی میشود.
About this lesson and its review
Published by DoAssignment. This reviewed lesson follows Alberta Grade 11 Physics (Physics 20), expectation 20-A1.1k. It is a study resource, not an official curriculum publication.
Before publication, content is checked for structure, mathematical or chemical notation, calculations, course boundaries, and readability. Errors can still occur, so corrections are welcomed.