DoAssignment study guide

20-A1.3k · Interpret uniform and uniformly accelerated motion from words, numbers, and graphs

Learn to interpret uniform and uniformly accelerated motion from words, numbers, and graphs through clear examples and targeted practice.

Alberta Grade 11 Physics

Kinematics

Separate slope from area before calculating motion

A motion graph is a compact story about how an object moves. In Physics 20, a velocity–time graph has two useful readings: its slope gives acceleration, and its signed area gives displacement. These are different quantities with different units. Begin by choosing a positive direction, then read the axes before reaching for a formula.

What you will learn

  • Read acceleration from the slope of a velocity–time graph.
  • Find displacement from area under the graph.
  • Check signs and units against a physical story.

Start with the axes

Time belongs on the horizontal axis, usually in seconds. Velocity belongs on the vertical axis, in metres per second, with its sign relative to a declared positive direction. A point at 6 m/s says what the velocity is at that instant; it does not say that the cart has travelled 6 m. The line between plotted points represents the stated constant-acceleration model, not a set of independently measured positions.

Slope means acceleration

For a straight segment, divide the change in velocity by the elapsed time. A steeper upward segment has a larger positive acceleration. A flat segment has zero acceleration even if the object is moving quickly. A downward segment has negative acceleration; that does not necessarily mean the object moves backward. Velocity and acceleration signs must be interpreted separately.

Area means displacement

The area between a velocity curve and the time axis gives displacement. A rectangle uses constant velocity times time. A sloped straight segment makes a trapezoid, or a rectangle plus a triangle. Area above the axis is positive and area below it is negative. If a graph crosses the axis, split the regions before adding signed areas. Distance travelled instead adds their absolute sizes.

Reasonableness check

The slope unit is (m/s)/s = m/s² and the area unit is (m/s)·s = m. If an answer for displacement has m/s², a slope was mistaken for an area. State whether the graph is hypothetical practice data or observations; a drawn line alone is not evidence of a laboratory measurement.

Worked example

A cart speeds up for four seconds

A cart moves east at 2.0 m/s at t = 0 s. It accelerates uniformly to 6.0 m/s at t = 4.0 s. Take east as positive. Find acceleration and displacement during the interval.
Hypothetical cart velocity–time graph
Hypothetical cart velocity–time graphStraight line assumes constant acceleration from 2.0 to 6.0 m/s; horizontal axis is time, vertical axis is eastward velocity.0 s, 2 m/s4 s, 6 m/sTime (s)Velocity east (m/s)Hypothetical practice values, not measured data

Straight line assumes constant acceleration from 2.0 to 6.0 m/s; horizontal axis is time, vertical axis is eastward velocity.

  1. Read slope
    The velocity rises by 4.0 m/s over 4.0 s.
    a = (6.0 - 2.0)/4.0 = 1.0 m/s2\mathrm{m/s^2}
  2. Read area
    The region is a trapezoid whose parallel sides are 2.0 and 6.0 m/s.
    Δx = ((2.0 + 6.0)/2)(4.0) = 16 m\mathrm{m}
  3. Interpret
    Both results are positive, so the cart accelerates and moves east.
Answer: Acceleration is 1.0 m/s² east; displacement is 16 m east.
Check: Average velocity 4.0 m/s for 4.0 s also gives 16 m.

Common mistakes and how to avoid them

Calling the slope 16 m because that is the area.
Correction: Slope and area answer different questions: acceleration is 1.0 m/s²; displacement is 16 m.

Lesson summary

  • Slope of velocity versus time gives acceleration.
  • Signed area under velocity versus time gives displacement.
  • Use axis units and the direction convention to check the result.

Check your understanding

Question 1

A velocity–time line is horizontal at +3 m/s for 2 s. What is the displacement?
  1. 0 m
  2. +3 m
  3. +6 m
  4. +6 m/s²
Show answer and explanation
+6 m
The rectangular area is (3 m/s)(2 s) = +6 m; zero slope means zero acceleration, not zero displacement.

Question 2

What does a negative slope on a velocity–time graph mean?
  1. The object must be west of its start.
  2. Acceleration is negative under the chosen sign convention.
  3. The object has no velocity.
  4. Distance is negative.
Show answer and explanation
Acceleration is negative under the chosen sign convention.
A negative slope gives negative acceleration; velocity may still be positive.

Key terms

Velocity
Rate of change of displacement, with direction.
Acceleration
Rate of change of velocity.

Continue through Physics 20

View the complete Physics 20 Alberta Grade 11 Physics curriculum and lessons

Tutor support for 20-A1.3k · Interpret uniform and uniformly accelerated motion from words, numbers, and graphs

Working on 20-A1.3k · Interpret uniform and uniformly accelerated motion from words, numbers, and graphs in Physics 20? Bring the question and your own attempt. In a live session, you can label the axes and connect each feature of the graph to the equation or situation. Ask about the first step that does not make sense, then try a similar question yourself.

Explore physics tutoring · Request an eligible free 30-minute introduction. Your request is matched by subject and language; a tutor must accept before a time is confirmed.

برای مبحث 20-A1.3k · تفسیر حرکت یکنواخت و با شتاب ثابت از متن، عدد و نمودار در درس Physics 20، سؤال و تلاش خود را همراه بیاورید. در جلسه می‌توانید محورها را برچسب بزنید و هر ویژگی نمودار را به معادله یا موقعیت مسئله ربط دهید. راهنمای معلم فیزیک را ببینید یا جلسهٔ معارفهٔ رایگان ۳۰ دقیقه‌ای درخواست کنید. زمان جلسه پس از پذیرش معلم قطعی می‌شود.

About this lesson and its review

Published by DoAssignment. This reviewed lesson follows Alberta Grade 11 Physics (Physics 20), expectation 20-A1.3k. It is a study resource, not an official curriculum publication.

Before publication, content is checked for structure, mathematical or chemical notation, calculations, course boundaries, and readability. Errors can still occur, so corrections are welcomed.

Official curriculum reference

Report a correction or ask a question