DoAssignment study guide

20-C2.3k · Apply conservation of mechanical energy in isolated systems

Learn to apply conservation of mechanical energy in isolated systems through clear examples and targeted practice.

Alberta Grade 11 Physics

Circular Motion, Work and Energy

Track kinetic and potential energy in one isolated model

Energy accounting helps solve motion questions without tracking every instant. For an isolated mechanical system, gravitational potential energy can change into kinetic energy while their total stays constant. The word isolated matters: it is a model that excludes energy transfer out of the selected system. State the system, reference height, and assumptions before calculating.

What you will learn

  • Define the mechanical system and zero height.
  • Find kinetic and potential energy at several positions.
  • Recognize when a non-isolated system needs a different account.

Choose the system and reference

Take the ball and Earth together as the system and choose the floor as zero gravitational potential energy. With that choice, potential energy near Earth is mass times gravitational acceleration times height. The zero height is a convention, but all heights in one calculation must use the same reference. If the ball starts from rest, its initial kinetic energy is zero.

Conserve total mechanical energy

Ignoring air resistance, the total of kinetic and gravitational potential energy stays fixed. At the top, all 98 J is potential. Halfway down, the remaining height is half as large, so potential energy is 49 J; kinetic energy is also 49 J. Just before the floor, potential energy is approximately zero and kinetic energy approaches 98 J. The graph shows energy accounting, not a claim about a measured trajectory.

Know the limits

If air resistance matters, mechanical energy of the ball–Earth system decreases because energy transfers to thermal energy and the surrounding air. Total energy is still conserved for a larger isolated system, but the simple mechanical-energy equality no longer holds for the chosen model. Do not call kinetic energy negative; direction belongs to velocity, while kinetic energy is a nonnegative scalar.

Worked example

A ball falling from five metres

A 2.0 kg ball is released from rest 5.0 m above the floor. Ignore air resistance and use g = 9.8 m/s². With the floor at zero height, find kinetic and potential energy at the top, 2.5 m above the floor, and just before the floor.
Mechanical-energy account at three heights
Mechanical-energy account at three heightsCalculated from a 2.0 kg ball, g = 9.8 m/s², floor at zero height, and no air resistance. The bars show energy values, not positions or travel times.98 JTop 5.0 m98 JMiddle 2.5 m98 JBottom 0 mKU

Calculated from a 2.0 kg ball, g = 9.8 m/s², floor at zero height, and no air resistance. The bars show energy values, not positions or travel times.

  1. Initial total
    The ball starts from rest, so its total mechanical energy equals its initial gravitational potential energy.
    E = 2.0(9.8)(5.0) = 98 J\mathrm{J}
  2. Middle state
    At 2.5 m, the potential energy is 49 J. Conservation leaves 49 J as kinetic energy.
    K = 98 - 49 = 49 J\mathrm{J}
  3. Bottom state
    Just before impact, height is approximately zero, so nearly all mechanical energy is kinetic.
    K = 98 - 0 = 98 J\mathrm{J}
Answer: Top: K = 0 J and U = 98 J. At 2.5 m: K = 49 J and U = 49 J. Just before the floor: K ≈ 98 J and U ≈ 0 J.
Check: Each state totals 98 J; all component energies are nonnegative.

Common mistakes and how to avoid them

Saying 98 J of potential energy is destroyed during the fall.
Correction: Under this model it transforms into kinetic energy; the total remains 98 J.
Using different zero heights in the same calculation.
Correction: Choose one reference height and keep it throughout.

Lesson summary

  • For an isolated mechanical model, kinetic plus potential energy stays constant.
  • State the system, reference height and air-resistance assumption.
  • If energy leaves the mechanical system, include the transfer rather than forcing a constant total.

Check your understanding

Question 1

At the middle state, what is the total mechanical energy?
  1. 0 J
  2. 49 J
  3. 98 J
  4. 147 J
Show answer and explanation
98 J
49 J kinetic plus 49 J potential equals 98 J.

Question 2

Why can the simple mechanical-energy total decrease when air resistance is included?
  1. Energy is destroyed.
  2. Energy transfers to air and thermal stores outside the chosen mechanical account.
  3. Mass becomes negative.
  4. Gravity stops acting.
Show answer and explanation
Energy transfers to air and thermal stores outside the chosen mechanical account.
The selected mechanical system is not isolated when energy transfers to the surroundings.

Key terms

Mechanical energy
Sum of kinetic and potential energy in the chosen model.
Isolated system
A system with no energy transfer across its boundary in the model being used.

Continue through Physics 20

View the complete Physics 20 Alberta Grade 11 Physics curriculum and lessons

Tutor support for 20-C2.3k · Apply conservation of mechanical energy in isolated systems

Working on 20-C2.3k · Apply conservation of mechanical energy in isolated systems in Physics 20? Bring the question and your own attempt. In a live session, you can sketch the situation, name the quantities and check the units. Ask about the first step that does not make sense, then try a similar question yourself.

Explore physics tutoring · Request an eligible free 30-minute introduction. Your request is matched by subject and language; a tutor must accept before a time is confirmed.

برای مبحث 20-C2.3k · به‌کارگیری پایستگی انرژی مکانیکی در سامانهٔ منزوی در درس Physics 20، سؤال و تلاش خود را همراه بیاورید. در جلسه می‌توانید موقعیت را رسم کنید، کمیت‌ها را نام ببرید و یکاها را بررسی کنید. راهنمای معلم فیزیک را ببینید یا جلسهٔ معارفهٔ رایگان ۳۰ دقیقه‌ای درخواست کنید. زمان جلسه پس از پذیرش معلم قطعی می‌شود.

About this lesson and its review

Published by DoAssignment. This reviewed lesson follows Alberta Grade 11 Physics (Physics 20), expectation 20-C2.3k. It is a study resource, not an official curriculum publication.

Before publication, content is checked for structure, mathematical or chemical notation, calculations, course boundaries, and readability. Errors can still occur, so corrections are welcomed.

Official curriculum reference

Report a correction or ask a question