20-B1.5k · Explain static and kinetic friction qualitatively and quantitatively
Learn to explain static and kinetic friction qualitatively and quantitatively through clear examples and targeted practice.
Alberta Grade 11 Physics
Dynamics
How touching surfaces resist starting and continuing to slide
Friction is a contact force between touching surfaces. It can prevent sliding or act while surfaces slide past each other. In this lesson, the physical system is the object whose friction we are finding, such as a box. The reference frame is the floor, treated as stationary. Choose right as the positive horizontal direction and up as the positive vertical direction. A force is a vector, so it has both magnitude and direction. Mass and the coefficient of friction are scalars; they have magnitude only. The normal force is the contact force perpendicular to a surface. These ideas let us describe friction and calculate its magnitude.
What you will learn
Describe the difference between static and kinetic friction.
Determine the direction of friction from the contact between surfaces.
Use the normal force and friction coefficients to calculate friction.
Explain why static friction is not always at its maximum.
1. Static and kinetic friction
Static friction acts when two touching surfaces are not sliding relative to each other. It can oppose a push and keep an object at rest. For example, if you push a box gently to the right, static friction acts to the left. The box stays still because static friction balances the push.
Static friction can change size to meet the situation. A small push needs only a small amount of friction. A stronger push needs more friction. There is a limit to how much static friction the surfaces can provide. If the needed friction exceeds that limit, sliding begins.
Kinetic friction acts while two touching surfaces slide relative to each other. It points opposite the sliding direction at the contact. If a box slides right across a floor, kinetic friction on the box points left. In a simple model, its magnitude is approximately constant for a given pair of surfaces and normal force.
The coefficient of friction is a number that describes the friction between two surfaces in this model. It has no units. The symbol μs represents the coefficient for the maximum static friction; μk represents the coefficient for kinetic friction. Often, μs is greater than μk. This helps explain why starting a slide can take more force than keeping an object sliding.
Static friction acts when the touching surfaces do not slide relative to each other.
Kinetic friction acts while the touching surfaces slide.
Friction acts along the contact surface, opposite sliding or the tendency to slide.
2. The friction model and its direction
The normal force, written as FN, is perpendicular to the surface. On a level floor, if the only vertical forces are the normal force upward and weight downward, and the object has no vertical acceleration, these forces have equal magnitudes. Weight is calculated from mass and gravitational field strength: Fg=mg. Near Earth's surface, use g≈9.8N/kg.
The maximum static friction depends on the normal force and the coefficient of static friction. The actual static friction can be any value from zero up to that maximum. It is not automatically equal to the maximum. Kinetic friction is modelled as the kinetic coefficient multiplied by the normal force. These equations give magnitudes, not directions.
To decide the direction, ask whether the surfaces are sliding. If they are, friction opposes their relative sliding. If they are not, ask which way the object would begin to slide if friction were absent. Static friction opposes that tendency. For example, a stationary box pushed right has static friction to the left.
These relationships are models for ordinary situations. A coefficient must be provided or known for the surfaces. The normal force must also be determined; do not assume it always equals the object's weight. That equality applies to a level-floor situation with no other vertical forces and no vertical acceleration.
0≤fs≤fs,max=μsFN,fk=μkFN
Static friction can vary from zero up to its maximum.
Use the maximum static-friction relationship at the threshold of sliding.
Use the kinetic-friction relationship only while surfaces are sliding.
A coefficient has no units, so friction has the same units as normal force: newtons.
3. A reliable way to solve friction questions
First name the object and the surfaces touching it. State the reference frame and positive direction. Then identify whether the surfaces are sliding. This decides whether to use static or kinetic friction.
A free-body diagram is a sketch of the forces acting on one chosen object. For a box on a level floor, it may show weight down, the normal force up, an applied push along the floor, and friction along the floor. The diagram is a model of the situation, not measured evidence.
Next determine the normal force from the forces perpendicular to the surface. Use the supplied friction coefficient and the appropriate relationship. For static friction, check whether the friction needed to prevent sliding is no greater than the maximum. For kinetic friction, calculate the modelled friction magnitude directly.
Finally state the direction in words. Keep guard digits through calculations, then round the final value to a sensible number of significant figures based on the supplied data. Check that friction is in newtons, that its direction opposes sliding or the tendency to slide, and that the value fits the situation.
Identify the object, reference frame, positive direction, and contact surfaces.
Decide whether the surfaces are sliding before choosing a friction model.
Check the normal force rather than assuming it equals weight.
Report a magnitude and a direction for the friction force.
Worked example
A box that stays at rest
A 12kg box rests on a level floor. A person pushes it right with 18N. The coefficient of static friction is 0.40. Find the friction force and decide whether the box slides. Treat the values as hypothetical.
Forces on the stationary box
Schematic free-body diagram. Friction opposes the box's tendency to move right.
Set the system and find the normal force
The system is the box, and the stationary floor is the reference frame. Right and up are positive. There are no other vertical forces and no vertical acceleration, so the normal force equals the weight. Use the supplied mass and the near-Earth value of gravitational field strength.
FN=mg=(12kg)(9.8N/kg)=117.6N
Find the maximum static friction
This is the greatest static friction the surfaces can provide. Keep the calculated normal force for the next step rather than rounding it early.
fs,max=(0.40)(117.6N)=47.04N
Compare the push with the limit
The box needs 18N of friction to balance the push. This is less than the maximum available, so static friction can match the push. It points left, and the box does not slide.
fs=18N left
Answer: Static friction is 18N left. The box remains at rest.
Check: The friction magnitude is less than the maximum of about 47N, so static friction can provide it. The push and friction are equal in magnitude and opposite in direction.
Worked example
The threshold for starting to slide
A 10kg crate rests on a level floor. Its coefficient of static friction is 0.35. What is the smallest horizontal push that can bring it to the threshold of sliding? Values are hypothetical.
Crate at the sliding threshold
Schematic force diagram at the threshold of sliding.
Find the normal force
The system is the crate, viewed from the stationary floor frame. Take right as positive. There are no other vertical forces and no vertical acceleration, so the normal force equals the weight.
FN=mg=(10kg)(9.8N/kg)=98N
Use the threshold condition
At the threshold of sliding, static friction has reached its maximum. The smallest push that reaches this threshold has the same magnitude as that maximum friction and points right.
Fpush,min=fs,max=μsFN=(0.35)(98N)=34.3N
Answer: The smallest push to reach the threshold is about 34N to the right.
Check: The coefficient is unitless, so multiplying it by a force gives newtons. The answer is about one-third of the crate's 98N weight, which is reasonable for a coefficient of 0.35.
Worked example
Friction while a box slides
A 7.5kg box slides right across a level floor. The coefficient of kinetic friction is 0.22. Find the kinetic friction force. Treat the values as hypothetical.
Sliding box
Schematic force diagram. The box slides right, so kinetic friction points left.
Determine the normal force
The system is the box, and the stationary floor frame is used. Right is positive. Vertically, there are no other forces and no acceleration, so the normal force equals the weight.
FN=mg=(7.5kg)(9.8N/kg)=73.5N
Calculate kinetic friction
The surfaces are sliding, so use the kinetic-friction relationship. The box slides right; friction therefore points left. Round the final magnitude to two significant figures.
fk=μkFN=(0.22)(73.5N)=16N left
Answer: Kinetic friction is about 16N to the left.
Check: The coefficient has no units, so the result is in newtons. Friction points opposite the rightward sliding, and its magnitude is less than the normal force, as expected for the given coefficient.
Common mistakes and how to avoid them
Static friction always equals its maximum value.
Correction: Static friction adjusts to the amount needed to prevent sliding, up to its maximum. Use the maximum at the threshold of sliding.
Friction always points opposite the object's overall motion.
Correction: Determine friction from the relative sliding or tendency to slide at the contact between the two surfaces.
The normal force always equals the object's weight.
Correction: They are equal in the level-floor examples because there are no other vertical forces and no vertical acceleration. Check the situation before making that assumption.
Kinetic friction acts whenever an object is moving.
Correction: Kinetic friction applies when the touching surfaces slide relative to each other. If they do not slide relative to each other, use static friction.
Lesson summary
Static friction acts without relative sliding and can vary up to a maximum.
Kinetic friction acts while surfaces slide relative to each other.
The maximum static friction and kinetic friction are modelled using the coefficient of friction and the normal force.
Friction points opposite the sliding or the tendency to slide at the contact.
Identify the friction type, normal force, direction, and units before calculating.
Check your understanding
Question 1
A stationary box is pushed right with 12N. Its maximum static friction is 40N. If it remains at rest, what is the static friction?
40N left
12N left
12N right
0N
Show answer and explanation
12N left
Static friction supplies the amount needed to prevent sliding, not automatically its maximum. It balances the push with 12N to the left.
Question 2
A box slides left across a floor. Which way does kinetic friction on the box point?
Left
Right
Up
Down
Show answer and explanation
Right
Kinetic friction opposes the relative sliding at the floor, so it points right.
Question 3
A sliding object has a normal force of 50N and a kinetic-friction coefficient of 0.30. What is the kinetic-friction magnitude?
0.30N
15N
50N
167N
Show answer and explanation
15N
Use fk=μkFN. The calculation is (0.30)(50N)=15N.
Key terms
Friction
A contact force along touching surfaces that opposes sliding or the tendency to slide.
Static friction
Friction when touching surfaces are not sliding relative to each other.
Kinetic friction
Friction when touching surfaces slide relative to each other.
Normal force
The contact support force perpendicular to a surface.
Coefficient of friction
A unitless number used in a simple model to describe friction between a pair of surfaces.
Free-body diagram
A sketch showing the forces acting on one chosen object.
Tutor support for 20-B1.5k · Explain static and kinetic friction qualitatively and quantitatively
Working on 20-B1.5k · Explain static and kinetic friction qualitatively and quantitatively in Physics 20? Bring the question and your own attempt. In a live session, you can sketch the situation, name the quantities and check the units. Ask about the first step that does not make sense, then try a similar question yourself.
برای مبحث 20-B1.5k · توضیح کیفی و کمی اصطکاک ایستایی و جنبشی در درس Physics 20، سؤال و تلاش خود را همراه بیاورید. در جلسه میتوانید موقعیت را رسم کنید، کمیتها را نام ببرید و یکاها را بررسی کنید. راهنمای معلم فیزیک را ببینید یا جلسهٔ معارفهٔ رایگان ۳۰ دقیقهای درخواست کنید. زمان جلسه پس از پذیرش معلم قطعی میشود.
About this lesson and its review
Published by DoAssignment. This reviewed lesson follows Alberta Grade 11 Physics (Physics 20), expectation 20-B1.5k. It is a study resource, not an official curriculum publication.
Before publication, content is checked for structure, mathematical or chemical notation, calculations, course boundaries, and readability. Errors can still occur, so corrections are welcomed.