DoAssignment study guide

20-B1.6k · Find resultant forces with graphical and algebraic vector components

Learn to find resultant forces with graphical and algebraic vector components through clear examples and targeted practice.

Alberta Grade 11 Physics

Dynamics

Graphical and algebraic vector components

A force can change an object's motion. When several forces act on one object, their combined effect is called the resultant force. This lesson focuses on finding that force using a vector drawing and using components. The system is the object whose forces are being combined. Use a reference frame with a horizontal x-axis and a vertical y-axis. Unless stated otherwise, right and up are positive. A force is a vector: it has both magnitude and direction. Mass and time are scalars: they have magnitude but no direction. Force is measured in newtons, abbreviated N. The examples use hypothetical force values, not measured data.

What you will learn

  • Distinguish a force vector from a scalar quantity.
  • Find a resultant force by drawing a scaled vector diagram.
  • Find a resultant force by resolving forces into perpendicular components.
  • Report a resultant with magnitude, direction, units, and a reasonableness check.

1. Represent the forces

Start by naming the system. Include only forces acting on that object. A force diagram shows the object and arrows for the forces on it. Draw each arrow from the same point when comparing force directions. The arrow's direction shows the force direction. Its length can represent the force magnitude.
A reference frame is the set of axes used to describe directions. Here, the positive x-direction is right and the positive y-direction is up. Leftward or downward components are negative. Choosing and keeping the same directions prevents sign errors.
The resultant force is the vector sum of all forces on the system. It is not an additional kind of force. It describes the combined effect of the forces already shown.
F⃗R=∑F⃗i\vec F_{\mathrm{R}}=\sum \vec F_i
  • State the system and coordinate directions before calculating.
  • A force vector needs both a magnitude and a direction.
  • Use N for force, and keep signs consistent with the chosen axes.

2. Find a resultant graphically

A graphical method uses a scaled drawing. Choose a scale that fits the page, such as a stated number of newtons per centimetre. Draw one force arrow to scale, then place the tail of the next arrow at the first arrow's head. Continue for each force. This head-to-tail arrangement keeps each arrow's direction and length.
The resultant runs from the tail of the first arrow to the head of the last arrow. Measure its length and use the scale to find its magnitude. Measure its angle from the positive x-direction to state its direction. A protractor and ruler give an estimate, so a graphical answer is usually less precise than a calculation.
A scale drawing is a model of the stated forces. It is not evidence from an experiment. Check that the drawing includes every force once and that the resultant points toward the final arrowhead.
resultant scale length\text{resultant scale length} = measured length\text{measured length}×force per unit length
  • Write the drawing scale clearly.
  • Arrange force arrows head-to-tail.
  • Measure the resultant from the first tail to the last head.

3. Find a resultant with components

A component is one part of a vector along an axis. Resolve each angled force into a horizontal component and a vertical component. For an angle measured from the positive x-axis, the horizontal component uses cosine and the vertical component uses sine. Keep the sign of each component: right and up are positive, while left and down are negative.
Add all horizontal components to get the resultant's x-component. Separately add all vertical components to get its y-component. These two sums describe the same resultant vector. Use the Pythagorean relationship to find its magnitude. Use the inverse tangent relationship to find its direction, then check the signs to choose the correct quadrant.
Angles in this lesson are measured counterclockwise from the positive x-axis. If both resultant components are positive, the direction is above the positive x-axis. If one or both are negative, use the component signs to identify the correct direction. Round sensibly, usually to two or three significant figures.
Fx=Fcos⁡θ,Fy=Fsin⁡θ,FR=FRx2+FRy2F_x=F\cos\theta,\quad F_y=F\sin\theta,\quad F_{\mathrm{R}}=\sqrt{F_{\mathrm{R}x}^2+F_{\mathrm{R}y}^2}
  • Resolve every force, including forces that already point along an axis.
  • Add x-components only with x-components, and y-components only with y-components.
  • The resultant magnitude is non-negative; its direction carries the directional information.

4. Check the result

A useful check compares the calculated result with the original force directions. If several forces point in opposite directions, some components should partly cancel. If all forces point generally the same way, the resultant should point that way too.
Check units as well. Components and resultant magnitude are forces, so their units are N. The direction is an angle, usually reported in degrees. A negative component is not a negative force magnitude; it indicates a direction opposite to that axis's positive direction.
  • Check units, component signs, direction, and reasonable size.
  • A scaled drawing and a component calculation should point in similar directions.

Worked example

Two perpendicular forces

A small cart is the system. A horizontal force of 30 N acts right and a second force of 40 N acts up. Find the resultant by a scale drawing and by components. Use right and up as positive.
Forces on the cart
Forces on the cartx, right positivey, up positivecart30 N40 N

Schematic force diagram; arrows show the stated forces.

  1. Choose a drawing scale
    Use a scale of 10 N per centimetre. Draw 3 cm right, then 4 cm up from the first arrowhead. The resultant joins the first tail to the final arrowhead.
  2. Measure the graphical result
    The drawing makes a right triangle with legs of 3 cm and 4 cm. Its diagonal measures about 5 cm. Applying the scale gives an estimated magnitude of 50 N. The measured angle is about 53 degrees above the positive x-axis.
  3. Calculate with components
    The forces already lie along the axes, so their components are 30 N horizontally and 40 N vertically. The resultant magnitude follows from the perpendicular components. The direction follows from the ratio of the vertical to horizontal component.
    FR=(30 N)2+(40 N)2=50 N,θ=tan⁡−1(40/30)=53.1∘F_{\mathrm{R}}=\sqrt{(30\,\mathrm{N})^2+(40\,\mathrm{N})^2}=50\,\mathrm{N},\quad \theta=\tan^{-1}(40/30)=53.1^\circ
  4. Check
    Both components are positive, so the direction is up and right. A 50 N resultant is larger than either individual force, which is reasonable for perpendicular forces. The graphical estimate agrees with the calculation.
Answer: The resultant is 50 N at 53.1° above the positive x-axis.
Check: The magnitude is in newtons, and the direction and signs match the up-right force diagram.

Worked example

Three forces with partial cancellation

A box is the system. Three forces act on it: 50 N at 30° above the positive x-axis, 35 N left, and 20 N down. Find the resultant. Use right and up as positive.
Forces on the box
Forces on the boxx, right positivey, up positivebox50 N35 N20 N

Schematic force diagram; the angled arrow is 30° above +x.

  1. Resolve the angled force
    The 50 N force contributes to both axes. Its horizontal component is positive because it points right. Its vertical component is positive because it points up. The other two forces lie along single axes.
    F1x=(50 N)cos⁡30∘=43.3 N,F1y=(50 N)sin⁡30∘=25.0 NF_{1x}=(50\,\mathrm{N})\cos 30^\circ=43.3\,\mathrm{N},\quad F_{1y}=(50\,\mathrm{N})\sin 30^\circ=25.0\,\mathrm{N}
  2. Add the components
    The leftward 35 N force subtracts from the horizontal total. The downward 20 N force subtracts from the vertical total. The resulting components are both positive.
    FRx=43.3−35=8.3 N,FRy=25.0−20=5.0 NF_{\mathrm{R}x}=43.3-35=8.3\,\mathrm{N},\quad F_{\mathrm{R}y}=25.0-20=5.0\,\mathrm{N}
  3. Find magnitude and direction
    Use the perpendicular resultant components to find the magnitude. The angle is measured from +x. Since both components are positive, the direction is above +x.
    FR=(8.3 N)2+(5.0 N)2=9.7 N,θ=tan⁡−1(5.0/8.3)=31∘F_{\mathrm{R}}=\sqrt{(8.3\,\mathrm{N})^2+(5.0\,\mathrm{N})^2}=9.7\,\mathrm{N},\quad \theta=\tan^{-1}(5.0/8.3)=31^\circ
  4. Check
    The large angled force is partly opposed in both directions, leaving a smaller resultant. The positive components place it up and right. The magnitude is less than 50 N, which is reasonable after cancellation.
Answer: The resultant is 9.7 N at 31° above the positive x-axis.
Check: The component sums and resultant have units of N. The direction agrees with the positive x- and y-components.

Worked example

Components in different directions

A ring is the system. Three pulls act on it: 60 N at 120° from +x, 45 N right, and 30 N down. Find the resultant. Use right and up as positive.
Pulls on the ring
Pulls on the ringx, right positivey, up positivering60 N45 N30 N

Schematic force diagram; 120° is counterclockwise from +x.

  1. Resolve the 60 N pull
    At 120°, the force points up and left. Its horizontal component is negative and its vertical component is positive. This sign pattern follows from the stated axes.
    F1x=(60 N)cos⁡120∘=−30 N,F1y=(60 N)sin⁡120∘=52.0 NF_{1x}=(60\,\mathrm{N})\cos120^\circ=-30\,\mathrm{N},\quad F_{1y}=(60\,\mathrm{N})\sin120^\circ=52.0\,\mathrm{N}
  2. Add horizontal and vertical parts
    Add the 45 N rightward pull to the horizontal total. Subtract the 30 N downward pull from the vertical total. The net components are both positive, although the original forces point in several directions.
    FRx=−30+45=15 N,FRy=52.0−30=22.0 NF_{\mathrm{R}x}=-30+45=15\,\mathrm{N},\quad F_{\mathrm{R}y}=52.0-30=22.0\,\mathrm{N}
  3. Calculate the resultant
    The component sums are perpendicular, so they give the two legs for the magnitude calculation. Use their ratio for the angle. Both are positive, placing the direction in the up-right quadrant.
    FR=(15 N)2+(22.0 N)2=26.6 N,θ=tan⁡−1(22.0/15)=55.7∘F_{\mathrm{R}}=\sqrt{(15\,\mathrm{N})^2+(22.0\,\mathrm{N})^2}=26.6\,\mathrm{N},\quad \theta=\tan^{-1}(22.0/15)=55.7^\circ
  4. Check
    The upward component from the angled pull exceeds the downward pull, and the rightward pull exceeds the leftward component. An up-right resultant is therefore reasonable. Its magnitude is smaller than the sum of the three force magnitudes.
Answer: The resultant is 26.6 N at 55.7° above the positive x-axis.
Check: The magnitude is a force in N. The component signs and stated direction agree.

Common mistakes and how to avoid them

Adding force magnitudes directly even when the forces point in different directions.
Correction: Add components along each axis, then combine the two perpendicular totals.
Giving a magnitude without a direction.
Correction: A resultant is a vector. Report its magnitude, unit, and direction.
Using a positive component for a leftward or downward force.
Correction: With right and up positive, left and down components are negative.
Using an angle from the wrong axis or quadrant.
Correction: State that the angle is measured from +x, and use the component signs to select the direction.

Lesson summary

  • Choose the system and coordinate directions before working.
  • A scaled head-to-tail drawing gives a graphical estimate of the resultant.
  • Resolve forces into x- and y-components, and add like components.
  • Combine the resultant components for magnitude and direction.
  • Check units, signs, direction, and whether the size is reasonable.

Check your understanding

Question 1

A force of 12 N acts right and a force of 5 N acts left. What is the resultant?
  1. 7 N right
  2. 17 N right
  3. 7 N left
  4. 17 N left
Show answer and explanation
7 N right
The forces lie on one axis. With right positive, the sum is 12 N minus 5 N, so the result is 7 N right.

Question 2

A 10 N force acts at 60° above +x. Which pair gives its components?
  1. 5.0 N right and 8.7 N up
  2. 8.7 N right and 5.0 N up
  3. 5.0 N left and 8.7 N up
  4. 10 N right and 10 N up
Show answer and explanation
8.7 N right and 5.0 N up
The horizontal part is the magnitude times cosine, and the vertical part is the magnitude times sine. Both components are positive at 60°.

Question 3

The resultant components are 0 N horizontally and 9 N downward. What is the resultant?
  1. 9 N downward
  2. 9 N upward
  3. 0 N
  4. 9 N right
Show answer and explanation
9 N downward
There is no horizontal component, and the vertical component is negative under the up-positive convention. The resultant is 9 N downward.

Key terms

System
The object or group of objects whose forces are being considered.
Reference frame
The axes and directions used to describe positions and vectors.
Vector
A quantity with both magnitude and direction.
Scalar
A quantity with magnitude but no direction.
Component
The part of a vector along one chosen axis.
Resultant force
The vector sum of all forces acting on the system.

Continue through Physics 20

View the complete Physics 20 Alberta Grade 11 Physics curriculum and lessons

Tutor support for 20-B1.6k · Find resultant forces with graphical and algebraic vector components

Working on 20-B1.6k · Find resultant forces with graphical and algebraic vector components in Physics 20? Bring the question and your own attempt. In a live session, you can draw and label the physical system, justify each force or moment, then check the equations and units. Ask about the first step that does not make sense, then try a similar question yourself.

Explore physics tutoring · Request an eligible free 30-minute introduction. Your request is matched by subject and language; a tutor must accept before a time is confirmed.

برای مبحث 20-B1.6k · یافتن نیروی برآیند با مؤلفه‌های برداری ترسیمی و جبری در درس Physics 20، سؤال و تلاش خود را همراه بیاورید. در جلسه می‌توانید سامانهٔ فیزیکی را رسم و برچسب‌گذاری کنید، دلیل هر نیرو یا گشتاور را توضیح دهید و سپس معادله‌ها و یکاها را بررسی کنید. راهنمای معلم فیزیک را ببینید یا جلسهٔ معارفهٔ رایگان ۳۰ دقیقه‌ای درخواست کنید. زمان جلسه پس از پذیرش معلم قطعی می‌شود.

About this lesson and its review

Published by DoAssignment. This reviewed lesson follows Alberta Grade 11 Physics (Physics 20), expectation 20-B1.6k. It is a study resource, not an official curriculum publication.

Before publication, content is checked for structure, mathematical or chemical notation, calculations, course boundaries, and readability. Errors can still occur, so corrections are welcomed.

Official curriculum reference

Report a correction or ask a question