DoAssignment study guide

20-C1.1k · Describe uniform circular motion as two-dimensional motion

Learn to describe uniform circular motion as two-dimensional motion through clear examples and targeted practice.

Alberta Grade 11 Physics

Circular Motion, Work and Energy

Describing position and direction as an object moves around a circle

Set up the physical system before describing its motion. In this lesson, the system is one object moving around a circular path. The reference frame is the ground, treated as stationary. Choose the circle's centre as the origin, positive x to the right, and positive y upward. Speed is a scalar: it has magnitude but no direction. Position and velocity are vectors: each has magnitude and direction. Uniform circular motion means motion around a circular path at constant speed. The path lies in a plane, so its changing position is described using two perpendicular directions, such as x and y.

What you will learn

  • Describe uniform circular motion as motion in a plane.
  • Distinguish constant speed from velocity that changes direction.
  • Use two perpendicular coordinates and direction words to describe circular motion.

1. Locate the object with two coordinates

A coordinate tells where an object is relative to an origin and chosen directions. On a flat surface, one coordinate cannot identify every possible position. We use two: horizontal position x and vertical position y. Together, these coordinates locate a point in the plane.
For a circle centred at the origin, the radius r is the distance from the centre to the circular path. At the right side, the object's coordinates are (r, 0). At the top, they are (0, r). At the left, they are (-r, 0), and at the bottom they are (0, -r). The coordinates change as the object moves around the circle. This is why the motion is two-dimensional.
The angle θ describes the position around the circle, measured from the positive x-axis. If the radius and angle are known, trigonometry gives both coordinates. Radius and coordinates are lengths, measured in metres. Angles in this lesson are in degrees. The signs show whether the object is left or right of the origin, and above or below it.
x=rcos⁡θ,y=rsin⁡θx=r\cos\theta,\quad y=r\sin\theta
  • The centre is the origin, and the radius is the distance from the centre to the path.
  • Two perpendicular coordinates describe position in a plane.
  • Negative x means left of the origin; negative y means below it.

2. Constant speed does not mean constant velocity

Speed tells how quickly distance is covered. It has no direction, so it is a scalar. Velocity describes both speed and direction, so it is a vector. An object can keep the same speed while its direction of motion changes.
At each point on a circular path, the velocity points along the path in the direction of travel. This direction is tangent to the path. A tangent follows the curve at one point. It points neither toward nor away from the centre.
For counterclockwise motion, velocity points upward at the rightmost point of the circle. At the topmost point, it points left. If the object travels clockwise instead, the velocity directions at those same points are reversed. The position does not change just because the travel direction changes.
Uniform means the speed stays the same. It does not mean the velocity vector stays the same, because that vector's direction changes as the object travels around the circle.
  • Uniform circular motion has constant speed and a changing direction of motion.
  • Velocity includes direction; speed does not.
  • Velocity is tangent to the path and points in the direction of travel.

3. Use a consistent description

First state the reference frame and positive coordinate directions. Then identify the circle's centre and radius. Give the object's position using two coordinates or an angle and radius. Finally, state the direction of travel and the velocity direction at that location. This keeps position and motion direction distinct.
A schematic figure can show the path and a velocity arrow, but it is not measured evidence. The figures in this lesson illustrate hypothetical motion. They do not report observations from an experiment.
Check coordinate signs against the chosen axes. A point above the horizontal axis has positive y; a point below it has negative y. Check the velocity arrow against the stated travel direction. Reversing clockwise and counterclockwise travel reverses the velocity direction at a position, but leaves the position coordinates unchanged.
  • State the reference frame and positive directions before assigning signs.
  • Position tells where the object is; velocity tells how it is moving at that instant.
  • A schematic illustrates a model; it is not experimental evidence.

4. Check whether a description fits

A complete description identifies a circular path, constant speed, and direction of travel. It also recognizes that position and velocity are vectors in a plane. Saying only that an object is on a circle does not fully locate it; its position needs two coordinates or equivalent information such as an angle and radius.
Use the axes as a reasonableness check. The right side has positive x, and the upper half has positive y. For counterclockwise motion, velocity at the rightmost point points upward. A leftward velocity there would indicate the opposite travel direction.
The object follows one circular path in a plane. It does not move along two separate paths. Two coordinates describe the changing position in that plane.
  • A useful description combines path, speed, position, and direction.
  • Check coordinate signs against the axes and velocity direction against the travel direction.
  • One circular path is two-dimensional because its position changes in two coordinate directions.

Worked example

Find a position in the upper-right part of the circle

A puck follows a circular path of radius 0.80 m. Its position is at 30° above the positive x-axis. The system is the puck, the reference frame is the stationary rink, and positive x is right while positive y is up. Find its coordinates.
Puck on a circular path
Puck on a circular pathx (right)y (up)r = 0.80 mpuckvelocity, tangent

Schematic path. At the stated position, counterclockwise velocity points up and left.

  1. Choose the coordinates
    The origin is the circle's centre. Use the radius and angle to find both perpendicular position coordinates.
    x=rcos⁡θ,y=rsin⁡θx=r\cos\theta,\quad y=r\sin\theta
  2. Substitute the values
    The radius is in metres, so both coordinates will be in metres. Round to two significant figures, matching the given radius.
    x=(0.80 m)cos⁡30∘=0.69 m,y=(0.80 m)sin⁡30∘=0.40 mx=(0.80\,\mathrm{m})\cos30^\circ=0.69\,\mathrm{m},\quad y=(0.80\,\mathrm{m})\sin30^\circ=0.40\,\mathrm{m}
Answer: The puck's position is (0.69 m, 0.40 m) relative to the centre.
Check: Both coordinates are positive, as expected in the upper-right quadrant. Their distance from the origin is consistent with a radius of 0.80 m, allowing for rounding.

Worked example

Identify velocity direction at two positions

A bead moves counterclockwise at constant speed around a circle. The system is the bead, viewed from a stationary frame with positive x to the right and positive y upward. Describe its velocity direction at the rightmost and topmost points.
Counterclockwise motion
Counterclockwise motionx (right)y (up)circular pathbeadvelocity upward

At the rightmost point, velocity points upward; at the topmost point, it points left.

  1. Follow the path direction
    Velocity points along the path in the direction of travel, not along the radius. It follows the tangent at each point.
  2. Describe each direction
    At the rightmost point, counterclockwise travel heads upward. At the topmost point, it heads left. The speed is constant, but the velocity directions differ.
Answer: At the rightmost point, velocity points in the positive y-direction. At the topmost point, it points in the negative x-direction.
Check: Both directions agree with counterclockwise travel along the circle. Reversing the travel direction would reverse both velocity directions.

Worked example

Interpret a position with a negative coordinate

A small object moves clockwise on a circle of radius 1.2 m. Its position is at 150° from the positive x-axis. The system is the object in a stationary frame; positive directions are right and up. Find its coordinates and state its velocity direction.
Clockwise circular motion
Clockwise circular motionx (right)y (up)r = 1.2 mobjectvelocity, tangent

At the upper-left position, clockwise velocity points generally right and upward.

  1. Calculate both coordinates
    At 150°, the position is in the upper-left quadrant. Cosine is negative there and sine is positive. Keep metres through the calculation.
    x=(1.2 m)cos⁡150∘=−1.0 m,y=(1.2 m)sin⁡150∘=0.60 mx=(1.2\,\mathrm{m})\cos150^\circ=-1.0\,\mathrm{m},\quad y=(1.2\,\mathrm{m})\sin150^\circ=0.60\,\mathrm{m}
  2. Determine the motion direction
    At the upper-left part of the circle, clockwise travel follows the path toward the top and then right. Velocity is tangent to the path, so it points generally rightward and upward.
Answer: The position is approximately (-1.0 m, 0.60 m). The velocity points tangent to the path, generally rightward and upward.
Check: The negative x and positive y values place the object in the upper-left quadrant. The coordinates are consistent with a radius of 1.2 m after rounding. The velocity direction agrees with clockwise travel.

Common mistakes and how to avoid them

Calling velocity constant because speed is constant.
Correction: Speed stays constant, but velocity changes direction as the object follows the circle.
Using one coordinate to describe a position anywhere on the circle.
Correction: Use both x and y coordinates to locate the object in the plane.
Drawing velocity toward the centre.
Correction: Velocity points tangent to the path in the direction of travel.
Assuming clockwise and counterclockwise motion have the same velocity direction.
Correction: At the same position, reversing the travel direction reverses the velocity direction.

Lesson summary

  • Uniform circular motion is motion around a circular path at constant speed.
  • The path lies in a plane, so changing position is described with two coordinates.
  • Position and velocity are vectors; speed is a scalar.
  • Velocity is tangent to the path and changes direction even when speed remains constant.

Check your understanding

Question 1

An object is at the leftmost point of a circle centred at the origin. What are the signs of its coordinates?
  1. Positive x, zero y
  2. Negative x, zero y
  3. Zero x, positive y
  4. Zero x, negative y
Show answer and explanation
Negative x, zero y
The leftmost point is left of the origin and lies on the horizontal axis, so x is negative and y is zero.

Question 2

At the top of a circle, an object moves clockwise. Which way does its velocity point?
  1. Right
  2. Left
  3. Up
  4. Down
Show answer and explanation
Right
Velocity follows the tangent in the direction of travel. At the top, clockwise travel is toward the right.

Question 3

Which statement describes uniform circular motion correctly?
  1. Both speed and velocity direction remain constant.
  2. Speed changes, but direction remains constant.
  3. Speed remains constant, but velocity direction changes.
  4. The object moves along two straight paths at once.
Show answer and explanation
Speed remains constant, but velocity direction changes.
Uniform circular motion has constant speed, while the direction of motion changes around the path.

Key terms

Coordinate
A number that states position relative to a chosen origin and direction.
Reference frame
The viewpoint and coordinate system used to describe motion.
Scalar
A quantity with magnitude only, such as speed.
Vector
A quantity with magnitude and direction, such as position or velocity.
Tangent
The direction that follows a curved path at one point.
Uniform circular motion
Motion around a circular path at constant speed.

Continue through Physics 20

View the complete Physics 20 Alberta Grade 11 Physics curriculum and lessons

Tutor support for 20-C1.1k · Describe uniform circular motion as two-dimensional motion

Working on 20-C1.1k · Describe uniform circular motion as two-dimensional motion in Physics 20? Bring the question and your own attempt. In a live session, you can sketch the situation, name the quantities and check the units. Ask about the first step that does not make sense, then try a similar question yourself.

Explore physics tutoring · Request an eligible free 30-minute introduction. Your request is matched by subject and language; a tutor must accept before a time is confirmed.

برای مبحث 20-C1.1k · توصیف حرکت دایره‌ای یکنواخت به‌عنوان حرکت دوبعدی در درس Physics 20، سؤال و تلاش خود را همراه بیاورید. در جلسه می‌توانید موقعیت را رسم کنید، کمیت‌ها را نام ببرید و یکاها را بررسی کنید. راهنمای معلم فیزیک را ببینید یا جلسهٔ معارفهٔ رایگان ۳۰ دقیقه‌ای درخواست کنید. زمان جلسه پس از پذیرش معلم قطعی می‌شود.

About this lesson and its review

Published by DoAssignment. This reviewed lesson follows Alberta Grade 11 Physics (Physics 20), expectation 20-C1.1k. It is a study resource, not an official curriculum publication.

Before publication, content is checked for structure, mathematical or chemical notation, calculations, course boundaries, and readability. Errors can still occur, so corrections are welcomed.

Official curriculum reference

Report a correction or ask a question