DoAssignment study guide

20-C2.1k · Define mechanical energy as kinetic plus potential energy

Learn to define mechanical energy as kinetic plus potential energy through clear examples and targeted practice.

Alberta Grade 11 Physics

Circular Motion, Work and Energy

A focused lesson on the meaning and calculation of mechanical energy

Before describing energy, decide what object or group of objects you are considering. This is the physical system. A reference frame is the viewpoint used to describe the system. In these examples, use the ground as the reference frame. Choose upward as the positive direction when a direction is needed. Energy itself has no direction, so its value does not become negative just because upward or downward was chosen. The central idea in this lesson is simple: mechanical energy is kinetic energy plus potential energy. The examples use supplied energy values so that the focus stays on this definition.

What you will learn

  • Identify the physical system and reference frame before describing its energy.
  • Distinguish energy, a scalar, from a vector, which has magnitude and direction.
  • Define mechanical energy as the sum of kinetic energy and potential energy.
  • Add kinetic and potential energy values with correct units.

Start with the system and the quantities

A physical system is the object, or group of objects, being described. State the system clearly so it is clear which energy values belong in the calculation. For example, a ball can be the system in a simple energy account. The reference frame is the viewpoint used to describe that system. Here, the ground is the reference frame.
A vector has both a size and a direction. Position and velocity are examples of quantities that can be described with direction. A scalar has size only. Energy is a scalar: it is measured in joules and has no direction. A sign convention such as upward being positive helps describe directions for some quantities, but it does not give energy a direction.
Kinetic energy is the energy associated with motion. Potential energy is energy associated with a system's position or arrangement. This lesson uses kinetic and potential energy values that are already supplied. It does not calculate how those values were obtained.
  • Name the system and reference frame before discussing its energy.
  • Energy is a scalar, not a vector.
  • The SI unit for energy is the joule, symbol J\mathrm{J}.

The definition of mechanical energy

Mechanical energy is defined as kinetic energy plus potential energy. Use EmechE_{\mathrm{mech}} for mechanical energy, EkE_{\mathrm{k}} for kinetic energy, and EpE_{\mathrm{p}} for potential energy. The subscripts are labels that show which kind of energy is meant.
Each term in the sum is an energy, so each is measured in joules. Adding the two values gives mechanical energy in joules. Keep the quantities separate in your work until the final addition. This makes it easier to see which value is kinetic and which is potential.
This definition tells you what mechanical energy means. It does not, by itself, say that the total must stay unchanged between different situations. When a question supplies energy values for a state, add the kinetic and potential values for that state. Do not assume missing values or add other kinds of energy to this definition.
Emech=Ek+EpE_{\mathrm{mech}}=E_{\mathrm{k}}+E_{\mathrm{p}}
  • Mechanical energy is the sum of kinetic energy and potential energy.
  • Both terms and their sum use joules.
  • Use only the kinetic and potential values that the question gives.

A reliable way to make the energy sum

First name the system and reference frame. Then list the known kinetic and potential energy values, including their units. Identify the unknown as mechanical energy. Next write the definition before substituting values. Add the values and check that the result is in joules.
The positive direction should be stated when a problem uses direction, such as upward or downward motion. It is not needed to add scalar energy values, because energy has no direction. Do not attach a direction to a result such as 18 J\mathrm{18\ J}.
For a reasonableness check, compare the sum with each supplied value. If both values are non-negative, their sum should be at least as large as either one. Also check that the units match. A result in metres or seconds would not be an energy result.
  • Write the relationship before substituting values.
  • Carry joules through the addition.
  • Check that the sum is sensible and has no direction.

Worked example

Adding two energy values

A ball is the system, described from the ground reference frame. At one stated instant, its kinetic energy is 12.0 J12.0\ \mathrm{J} and its potential energy is 7.0 J7.0\ \mathrm{J}. Find its mechanical energy.
Energy account for the stated instant
Energy account for the stated instantHypothetical supplied values; the bars show the definition's two terms and their sum.19 JStated instant19 JMechanical totalKU

Hypothetical supplied values; the bars show the definition's two terms and their sum.

  1. Identify the quantities
    The system is the ball, and the reference frame is the ground. The known values are kinetic energy Ek=12.0 JE_{\mathrm{k}}=12.0\ \mathrm{J} and potential energy Ep=7.0 JE_{\mathrm{p}}=7.0\ \mathrm{J}. The unknown is mechanical energy. No direction is needed because energy is a scalar.
  2. Apply the definition
    Mechanical energy is defined as kinetic energy plus potential energy. Substitute the two supplied values, keeping the joule unit on each.
    Emech=12.0 J+7.0 JE_{\mathrm{mech}}=12.0\ \mathrm{J}+7.0\ \mathrm{J}
  3. Add and check
    The values add to 19.0 J19.0\ \mathrm{J}. This is greater than either supplied value, as expected for adding two positive amounts of energy. The unit is joules and the result has no direction.
    Emech=19.0 JE_{\mathrm{mech}}=19.0\ \mathrm{J}
Answer: The ball's mechanical energy is 19.0 J19.0\ \mathrm{J}.
Check: The result is in joules, has no direction, and exceeds both positive terms in the sum.

Worked example

A larger potential-energy value

A cart is the system, described from the ground reference frame. At a stated instant, its kinetic energy is 3.5 J3.5\ \mathrm{J} and its potential energy is 24.0 J24.0\ \mathrm{J}. Determine its mechanical energy.
Energy account at one stated instant
Energy account at one stated instantHypothetical supplied values; the total is the sum of the two kinds of energy.27.5 JStated instant27.5 JMechanical totalKU

Hypothetical supplied values; the total is the sum of the two kinds of energy.

  1. Set up
    The system is the cart, and the reference frame is the ground. The known energy values are 3.5 J3.5\ \mathrm{J} kinetic and 24.0 J24.0\ \mathrm{J} potential. The unknown is the mechanical energy. Since these are scalars, there is no positive or negative direction to assign.
  2. Substitute into the definition
    Use the definition directly. The order of the two terms does not change their sum, but identifying each term helps prevent mixing up the supplied values.
    Emech=Ek+Ep=3.5 J+24.0 JE_{\mathrm{mech}}=E_{\mathrm{k}}+E_{\mathrm{p}}=3.5\ \mathrm{J}+24.0\ \mathrm{J}
  3. Calculate and check
    Adding gives 27.5 J27.5\ \mathrm{J}. The result is larger than either term and uses the correct SI unit. The decimal places are consistent with the supplied values.
    Emech=27.5 JE_{\mathrm{mech}}=27.5\ \mathrm{J}
Answer: The cart's mechanical energy is 27.5 J27.5\ \mathrm{J}.
Check: The sum is in joules, has no direction, and is greater than either positive input.

Worked example

Find a missing kinetic-energy value

A puck is the system, described from the ground reference frame. Its mechanical energy at a stated instant is 41 J41\ \mathrm{J}, and its potential energy is 16 J16\ \mathrm{J}. Find its kinetic energy.
Energy account at the stated instant
Energy account at the stated instantHypothetical supplied values. The kinetic and potential terms add to the given mechanical energy.41 JStated instant41 JMechanical totalKU

Hypothetical supplied values. The kinetic and potential terms add to the given mechanical energy.

  1. Identify known and unknown values
    The system is the puck, and the reference frame is the ground. Mechanical energy and potential energy are known. Kinetic energy is unknown. All three quantities are scalar energies measured in joules.
  2. Rearrange the definition
    Start with mechanical energy as the sum of kinetic and potential energy. Subtract the known potential energy from both sides to isolate kinetic energy.
    Ek=Emech−EpE_{\mathrm{k}}=E_{\mathrm{mech}}-E_{\mathrm{p}}
  3. Substitute and check
    Substitute the known values and subtract. The answer is positive and in joules. Adding it back to the potential energy gives the stated mechanical energy, which checks the definition.
    Ek=41 J−16 J=25 JE_{\mathrm{k}}=41\ \mathrm{J}-16\ \mathrm{J}=25\ \mathrm{J}
Answer: The puck's kinetic energy is 25 J25\ \mathrm{J}.
Check: The units are joules, and 25 J+16 J=41 J25\ \mathrm{J}+16\ \mathrm{J}=41\ \mathrm{J}, matching the stated mechanical energy.

Common mistakes and how to avoid them

Calling mechanical energy only kinetic energy.
Correction: Include both terms: mechanical energy is kinetic energy plus potential energy.
Giving an energy a direction because upward was chosen as positive.
Correction: Energy is a scalar. State a direction only for quantities that have direction.
Adding values with different or missing units.
Correction: Check that both terms are energy values in joules before adding them.
Assuming this definition alone says the total is unchanged in every situation.
Correction: The definition states which two quantities make up mechanical energy. It does not by itself make a claim about changes between situations.

Lesson summary

  • Mechanical energy is defined as kinetic energy plus potential energy.
  • Kinetic energy and potential energy are scalar quantities measured in joules.
  • Name the system and reference frame, identify the known values, and apply the definition.
  • Check the unit and ensure the energy result is not assigned a direction.

Check your understanding

Question 1

A system has kinetic energy 8 J8\ \mathrm{J} and potential energy 5 J5\ \mathrm{J}. What is its mechanical energy?
  1. 3 J3\ \mathrm{J}
  2. 13 J13\ \mathrm{J}
  3. 40 J40\ \mathrm{J}
  4. correctIndex
Show answer and explanation
13 J13\ \mathrm{J}
Mechanical energy is the sum, so 8 J+5 J=13 J8\ \mathrm{J}+5\ \mathrm{J}=13\ \mathrm{J}.

Question 2

Which statement correctly describes energy in this lesson?
  1. Energy is a vector with an upward or downward direction.
  2. Energy is a scalar measured in joules.
  3. Energy is measured in metres.
  4. correctIndex
Show answer and explanation
Energy is a scalar measured in joules.
Energy has size but no direction, so it is a scalar. Its SI unit is the joule.

Key terms

Physical system
The object or group of objects being described.
Reference frame
The viewpoint used to describe a system.
Scalar
A quantity with size but no direction.
Vector
A quantity with both size and direction.
Kinetic energy
Energy associated with motion.
Potential energy
Energy associated with a system's position or arrangement.
Mechanical energy
The sum of a system's kinetic energy and potential energy.
Joule
The SI unit used to measure energy; its symbol is J\mathrm{J}.

Continue through Physics 20

View the complete Physics 20 Alberta Grade 11 Physics curriculum and lessons

Tutor support for 20-C2.1k · Define mechanical energy as kinetic plus potential energy

Working on 20-C2.1k · Define mechanical energy as kinetic plus potential energy in Physics 20? Bring the question and your own attempt. In a live session, you can sketch the situation, name the quantities and check the units. Ask about the first step that does not make sense, then try a similar question yourself.

Explore physics tutoring · Request an eligible free 30-minute introduction. Your request is matched by subject and language; a tutor must accept before a time is confirmed.

برای مبحث 20-C2.1k · تعریف انرژی مکانیکی به‌صورت مجموع جنبشی و پتانسیل در درس Physics 20، سؤال و تلاش خود را همراه بیاورید. در جلسه می‌توانید موقعیت را رسم کنید، کمیت‌ها را نام ببرید و یکاها را بررسی کنید. راهنمای معلم فیزیک را ببینید یا جلسهٔ معارفهٔ رایگان ۳۰ دقیقه‌ای درخواست کنید. زمان جلسه پس از پذیرش معلم قطعی می‌شود.

About this lesson and its review

Published by DoAssignment. This reviewed lesson follows Alberta Grade 11 Physics (Physics 20), expectation 20-C2.1k. It is a study resource, not an official curriculum publication.

Before publication, content is checked for structure, mathematical or chemical notation, calculations, course boundaries, and readability. Errors can still occur, so corrections are welcomed.

Official curriculum reference

Report a correction or ask a question