DoAssignment study guide

20-C2.2k · Relate kinetic, gravitational potential, and total mechanical energy

Learn to relate kinetic, gravitational potential, and total mechanical energy through clear examples and targeted practice.

Alberta Grade 11 Physics

Circular Motion, Work and Energy

How energy changes form as an object moves

A skateboarder moving down a ramp can gain speed while losing height. This lesson describes that change using energy. First define the system: here it may be the skateboarder and Earth together. The reference frame is the ground, treated as at rest. Choose upward as the positive vertical direction, so height is measured upward from a stated reference level. Energy is a scalar: it has a value and units, but no direction. Velocity is a vector, so it has both magnitude and direction. These ideas help us connect motion and height without confusing energy with a force.

What you will learn

  • Define a system, reference frame, and positive direction for an energy situation.
  • Relate kinetic energy, gravitational potential energy, and total mechanical energy.
  • Use energy changes to solve for speed or height in a stated situation.
  • Check units and decide whether an answer makes physical sense.

The three energy quantities

Kinetic energy is energy associated with motion. An object has more kinetic energy when it has more mass or moves faster. Speed is the size of velocity and is measured in metres per second. Mass is measured in kilograms. Kinetic energy is measured in joules, where one joule is one kilogram metre squared per second squared.
Gravitational potential energy is energy associated with an object's height in a gravitational field. For objects near Earth's surface, use the object's mass, the gravitational field strength, and its vertical height above a chosen reference level. The reference level is where we define gravitational potential energy to be zero. It can be the floor, the bottom of a ramp, or another convenient height. The numerical potential energy depends on this choice, but changes in potential energy do not.
Total mechanical energy is the sum of kinetic energy and gravitational potential energy for the chosen system. In this lesson, compare states of the same system using the same reference level. Mechanical energy stays constant when no energy is transferred into or out of the system and no energy changes into forms outside this model, such as thermal energy from friction or air resistance. If such effects matter, mechanical energy may change.
Ek=12mv2,Eg=mgh,Em=Ek+EgE_k=\frac{1}{2}mv^2,\quad E_g=mgh,\quad E_m=E_k+E_g
  • Kinetic and gravitational potential energy are scalars measured in joules.
  • Height is measured relative to a chosen zero level.
  • Total mechanical energy is kinetic energy plus gravitational potential energy.

Relating energy at different states

A state is a description of the system at one point in a process. For example, state 1 could be an object at the top of a ramp, and state 2 could be the same object lower down. If mechanical energy is conserved, the total at state 1 equals the total at state 2. This means a decrease in gravitational potential energy is matched by an increase in kinetic energy, provided no other energy transfer or change is included.
The relationship can be written using initial and final values. Initial means the starting state; final means the later state. If the object starts from rest, its initial kinetic energy is zero. If it ends at the chosen zero-height level, its final gravitational potential energy is zero. State these conditions before simplifying the relationship.
A negative height is allowed if the object is below the reference level. That gives negative gravitational potential energy relative to that choice. It does not mean the object has a negative amount of motion energy. The total mechanical energy can also have a value that depends on the reference level, while energy changes between states remain consistent.
Ek,1+Eg,1=Ek,2+Eg,2E_{k,1}+E_{g,1}=E_{k,2}+E_{g,2}
  • Compare the same system at two states.
  • Use conservation of mechanical energy only when the stated situation supports it.
  • Choose one height reference and use it consistently.

A reliable solving method

Start by naming the system and the reference frame. Choose upward or downward as the positive vertical direction and identify the zero-height level. Then list the known values and the unknown. Keep speed distinct from velocity: energy equations use speed, which is non-negative, even when the velocity points downward.
Write the energy relationship before inserting numbers. Substitute values with SI units: kilograms, metres, metres per second, and metres per second squared for gravitational field strength. Keep units in the calculation. Round the final value to a sensible number of significant figures based on the given values.
Finally, check the answer. Energy terms must have units of joules. A calculated speed must have units of metres per second and cannot be negative. Ask whether the result fits the situation: an object falling from rest should gain speed, and an object rising while slowing should lose kinetic energy.
1 J=1 kg m2/s21\,\mathrm{J}=1\,\mathrm{kg\,m^2/s^2}
  • Define the system, frame, direction, and height reference before solving.
  • Write the governing relationship before substitution.
  • Check units, sign, and physical reasonableness.

Reading energy changes

An energy account lists the kinetic and gravitational potential energies at each state. When mechanical energy is conserved, the total column has the same value at every state. The separate entries can change. This is why it is not correct to say that potential energy simply disappears as an object falls: in the model, its decrease corresponds to an increase in kinetic energy.
A graph or drawing can help show the change, but it is a representation, not measured evidence. The energy accounts in the examples are hypothetical calculations based on the stated conditions. Real observations could differ if friction or air resistance transfers energy into other forms.
  • The total can stay fixed even as its kinetic and potential parts change.
  • Hypothetical calculations are not experimental measurements.

Worked example

A ball falling from a ledge

A 0.50 kg ball is released from rest 3.0 m above the ground. Ignore air resistance. Find its speed just before it reaches the ground. Use the ground as zero height and take upward as positive.
Hypothetical energy account
Hypothetical energy accountMechanical energy is conserved in this air-resistance-free model.14.7 JTop14.7 JGroundKU

Mechanical energy is conserved in this air-resistance-free model.

  1. Set up the states
    The system is the ball and Earth, and the reference frame is the ground. The ball begins at rest at height 3.0 m and ends at height 0 m. With air resistance ignored, mechanical energy is conserved. The unknown is the final speed.
  2. Relate the energies
    At the start, kinetic energy is zero because the ball is at rest. At the ground, gravitational potential energy is zero by the chosen reference. Equate the initial and final total mechanical energies.
    0+mgh=12mv2+00+mgh=\frac{1}{2}mv^2+0
  3. Calculate and check
    The mass cancels. Substituting the values gives a speed of about 7.7 m/s. The speed is positive because speed has no direction; the ball's velocity is downward. The units reduce to metres per second, and a fall from 3.0 m should produce a speed greater than zero.
    v=2gh=2(9.8 m/s2)(3.0 m)=7.7 m/sv=\sqrt{2gh}=\sqrt{2(9.8\,\mathrm{m/s^2})(3.0\,\mathrm{m})}=7.7\,\mathrm{m/s}
Answer: The ball's speed just before reaching the ground is 7.7 m/s, downward for its velocity direction.
Check: The final kinetic energy is about 15 J, matching the initial gravitational potential energy. Both are in joules.

Worked example

Finding height from speed

A 2.0 kg cart moves at 4.0 m/s at a point on a smooth track. At another point it moves at 2.0 m/s. If mechanical energy is conserved, how much higher is the second point?
Hypothetical energy change
Hypothetical energy changeThe reference height is the first point; only the height difference is needed.16 JFirst point16 JSecond pointKU

The reference height is the first point; only the height difference is needed.

  1. Define the comparison
    The system is the cart and Earth, viewed from the ground. Take upward as positive. Let the height difference be the second height minus the first height. The cart slows, so its kinetic energy decreases; conservation means gravitational potential energy increases by the same amount.
  2. Use the change in energy
    The mass is 2.0 kg, and the given speeds are 4.0 m/s and 2.0 m/s. The difference in kinetic energy equals the increase in gravitational potential energy.
    12m(v12−v22)=mgΔh\frac{1}{2}m(v_1^2-v_2^2)=mg\Delta h
  3. Solve and check
    Cancel the common mass and calculate. The positive result means the second point is higher. The units reduce to metres, and a slower cart at a higher point is consistent with the stated energy model.
    Δh=v12−v222g=(4.0 m/s)2−(2.0 m/s)22(9.8 m/s2)=0.61 m\Delta h=\frac{v_1^2-v_2^2}{2g}=\frac{(4.0\,\mathrm{m/s})^2-(2.0\,\mathrm{m/s})^2}{2(9.8\,\mathrm{m/s^2})}=0.61\,\mathrm{m}
Answer: The second point is 0.61 m higher than the first.
Check: The cart loses 12 J of kinetic energy, and gains about 12 J of gravitational potential energy.

Worked example

A rising object with nonzero starting speed

A 0.20 kg object is thrown straight upward at 6.0 m/s from a point 1.0 m above the floor. Ignore air resistance. Find its maximum height above the floor.
Hypothetical energy account
Hypothetical energy accountThe floor is the zero-height reference.5.6 JLaunch5.6 JMaximum heightKU

The floor is the zero-height reference.

  1. Define the system and states
    Use the object and Earth as the system and the floor as zero height. The ground reference frame is used, with upward positive. At the start, the object has both kinetic and gravitational potential energy. At maximum height its speed is momentarily zero, so its kinetic energy is zero.
  2. Relate start and maximum height
    Mechanical energy is conserved because air resistance is ignored. Include the initial height; do not treat the starting point as zero height.
    12mvi2+mghi=mghf\frac{1}{2}mv_i^2+mgh_i=mgh_f
  3. Calculate the height
    The mass cancels. Add the rise in height to the initial 1.0 m. The result is above the starting point, as expected for an object thrown upward.
    hf=hi+vi22g=1.0 m+(6.0 m/s)22(9.8 m/s2)=2.8 mh_f=h_i+\frac{v_i^2}{2g}=1.0\,\mathrm{m}+\frac{(6.0\,\mathrm{m/s})^2}{2(9.8\,\mathrm{m/s^2})}=2.8\,\mathrm{m}
Answer: The maximum height is 2.8 m above the floor.
Check: The object rises about 1.8 m above its starting point. Its kinetic energy at launch becomes gravitational potential energy at the top.

Common mistakes and how to avoid them

Using total mechanical energy as if it were only kinetic energy.
Correction: Include both kinetic and gravitational potential energy at each state.
Changing the zero-height reference partway through a calculation.
Correction: Choose one reference level and use it for all heights in the comparison.
Using velocity direction as a positive or negative energy value.
Correction: Kinetic energy uses speed squared, so it is not negative. State direction separately when describing velocity.
Assuming mechanical energy is always conserved, even when friction or air resistance matters.
Correction: Use conservation only when the situation states or supports that energy is not transferred into forms outside the mechanical-energy account.

Lesson summary

  • Kinetic energy depends on mass and speed.
  • Near Earth's surface, gravitational potential energy depends on mass and height relative to a chosen level.
  • Total mechanical energy is the sum of kinetic and gravitational potential energy.
  • When mechanical energy is conserved, its total is equal at the initial and final states, even though its parts may change.
  • A valid solution states the system and reference, uses SI units, and checks the result.

Check your understanding

Question 1

A book is lifted slowly to a shelf. Using the shelf as the zero-height level, what is its gravitational potential energy at the shelf?
  1. Zero joules
  2. A positive value because it is above the floor
  3. A negative value because it is at rest
  4. It equals its kinetic energy
Show answer and explanation
Zero joules
The shelf is defined as the zero-height reference, so gravitational potential energy there is zero. Its choice of reference does not depend on whether the book is moving.

Question 2

An object falls without air resistance. Which description best matches the mechanical-energy model?
  1. Kinetic energy decreases while gravitational potential energy increases.
  2. Kinetic energy increases while gravitational potential energy decreases, and their sum stays constant.
  3. Both kinetic and gravitational potential energy stay constant.
  4. Total mechanical energy increases because the object speeds up.
Show answer and explanation
Kinetic energy increases while gravitational potential energy decreases, and their sum stays constant.
As the object falls, its height decreases and its speed increases. In this model, the decrease in gravitational potential energy matches the increase in kinetic energy.

Question 3

A 1.0 kg object moves at 3.0 m/s. What is its kinetic energy?
  1. 1.5 J
  2. 3.0 J
  3. 4.5 J
  4. 9.0 J
Show answer and explanation
4.5 J
Using kinetic energy equal to one-half mass times speed squared gives 0.5 × 1.0 × 9.0 = 4.5 J.

Key terms

System
The object or group of objects chosen for an energy analysis.
Reference frame
The viewpoint used to describe position and motion; here, the ground is treated as at rest.
Scalar
A quantity with magnitude and units but no direction.
Kinetic energy
Energy associated with an object's motion.
Gravitational potential energy
Energy associated with an object's height in a gravitational field.
Total mechanical energy
The sum of kinetic energy and gravitational potential energy in the model used.
Reference level
The chosen height where gravitational potential energy is defined as zero.
Conserved
Unchanged in total between states in the stated model.

Continue through Physics 20

View the complete Physics 20 Alberta Grade 11 Physics curriculum and lessons

Tutor support for 20-C2.2k · Relate kinetic, gravitational potential, and total mechanical energy

Working on 20-C2.2k · Relate kinetic, gravitational potential, and total mechanical energy in Physics 20? Bring the question and your own attempt. In a live session, you can sketch the situation, name the quantities and check the units. Ask about the first step that does not make sense, then try a similar question yourself.

Explore physics tutoring · Request an eligible free 30-minute introduction. Your request is matched by subject and language; a tutor must accept before a time is confirmed.

برای مبحث 20-C2.2k · ارتباط انرژی جنبشی، پتانسیل گرانشی و کل مکانیکی در درس Physics 20، سؤال و تلاش خود را همراه بیاورید. در جلسه می‌توانید موقعیت را رسم کنید، کمیت‌ها را نام ببرید و یکاها را بررسی کنید. راهنمای معلم فیزیک را ببینید یا جلسهٔ معارفهٔ رایگان ۳۰ دقیقه‌ای درخواست کنید. زمان جلسه پس از پذیرش معلم قطعی می‌شود.

About this lesson and its review

Published by DoAssignment. This reviewed lesson follows Alberta Grade 11 Physics (Physics 20), expectation 20-C2.2k. It is a study resource, not an official curriculum publication.

Before publication, content is checked for structure, mathematical or chemical notation, calculations, course boundaries, and readability. Errors can still occur, so corrections are welcomed.

Official curriculum reference

Report a correction or ask a question