DoAssignment study guide
20-C2.4k · Relate work to transferred energy and power to work rate
Learn to relate work to transferred energy and power to work rate through clear examples and targeted practice.
Alberta Grade 11 Physics
Circular Motion, Work and Energy
How forces transfer energy, and how quickly that transfer happens
What you will learn
- Explain how work is related to energy transferred to or from a system.
- Calculate work when a force acts along a displacement or at an angle to it.
- Relate power to the rate of doing work and calculate average power.
- Use SI units and check whether answers make physical sense.
Work is energy transferred by a force
- Work describes energy transferred by a force through a displacement.
- Work is a scalar and can be positive, negative, or zero.
- For a force along the displacement, use force multiplied by displacement.
- For a force at an angle, use the component along the displacement.
Work and changes in energy
- Positive work transfers energy to the chosen system.
- Negative work transfers energy from the chosen system.
- Define the system before describing energy transfer.
- Work and energy are both measured in joules.
Power is the rate of doing work
- Power is work rate: work done per time interval.
- The SI unit of power is the watt.
- Average power depends on both work and elapsed time.
- A positive or negative power follows the sign of the work.
A reliable calculation method
- Name the system and identify the force and displacement.
- Compare force direction with displacement before choosing the sign.
- Carry SI units through the substitution.
- Check units, sign, significant figures, and reasonableness.
Worked example
Pushing a crate
- Set up the systemThe system is the crate, viewed from the ground. Choose the direction of the crate's displacement as positive. The known force is 42 N, the displacement is 3.5 m, and the unknown is work by the student's force. The force and displacement point in the same direction.
- Calculate workFor a force parallel to displacement, the angle is zero and the cosine factor is one. Substitute the values with units.
- CheckTo two significant figures, the work is 1.5 × 10² J. The positive sign means the student's force transfers energy to the crate. Newton metres are joules, so the units are correct. A force of a few dozen newtons acting over several metres gives a result of this order.
Worked example
Pulling at an angle
- Define the quantitiesThe system is the sled, viewed from the ground. Let its horizontal displacement to the right be positive. The force has magnitude 60 N, and the displacement is 8.0 m to the right. The angle between them is 30°. The unknown is work by the pulling force.
- Use the force component along the displacementOnly the component of the force along the horizontal displacement contributes to work. The force points partly upward, so its full magnitude is not directed along the sled's motion.
- CheckThe answer is positive because the pulling force has a component in the direction of motion. It is less than the 480 J that a 60 N horizontal force would do over the same distance. The unit is N m, or J.
Worked example
Comparing work rates
- Identify the system and valuesThe system is the load, viewed from the ground. The motor transfers 900 J of energy to it in 6.0 s. The unknown is the motor's average power over that interval.
- Calculate average powerAverage power is work divided by elapsed time. Substitute the values, keeping joules and seconds in the calculation.
- CheckThe power is positive because the motor does positive work on the load. A watt is a joule per second, so the units match. The result means 150 J of work is done each second on average during this interval.
Common mistakes and how to avoid them
Lesson summary
- Work is energy transferred by a force through a displacement.
- Work depends on the part of the force that acts along the displacement.
- Positive work transfers energy to the system; negative work transfers energy from it.
- Average power is work divided by elapsed time.
- Use joules for work and energy, and watts for power.
Check your understanding
Question 1
- 10 N × 2.0 m
- 10 N ÷ 2.0 m
- 2.0 m ÷ 10 N
- correctIndex':0,
Show answer and explanation
Question 2
- Zero
- The force multiplied by displacement
- The force divided by displacement
- correctIndex':0,
Show answer and explanation
Question 3
- Motor A has average power 200 W, twice motor B's 100 W.
- Motor B has average power 200 W, twice motor A's 100 W.
- Both have average power 600 W.
- correctIndex':0,
Show answer and explanation
Key terms
- System
- The object or group of objects selected for study.
- Reference frame
- The viewpoint used to describe position and motion.
- Displacement
- The change in position from a starting point to an ending point, including direction.
- Work
- Energy transferred by a force acting through a displacement.
- Power
- The rate at which work is done.
- Scalar
- A quantity with magnitude but no direction.
- Vector
- A quantity with both magnitude and direction.
Continue through Physics 20
View the complete Physics 20 Alberta Grade 11 Physics curriculum and lessons
- 20-C2.3k · Apply conservation of mechanical energy in isolated systems
- 20-C2.5k · Describe power qualitatively and quantitatively
- 20-C1.1k · Describe uniform circular motion as two-dimensional motion
- 20-C1.2k · Explain inward acceleration in uniform circular motion
- 20-C1.3k · Relate speed, frequency, period, and radius
- 20-C1.6k · Find a celestial body’s mass from satellite orbital data
Tutor support for 20-C2.4k · Relate work to transferred energy and power to work rate
Working on 20-C2.4k · Relate work to transferred energy and power to work rate in Physics 20? Bring the question and your own attempt. In a live session, you can sketch the situation, name the quantities and check the units. Ask about the first step that does not make sense, then try a similar question yourself.
Explore physics tutoring · Request an eligible free 30-minute introduction. Your request is matched by subject and language; a tutor must accept before a time is confirmed.
برای مبحث 20-C2.4k · ارتباط کار با انرژی منتقلشده و توان با آهنگ انجام کار در درس Physics 20، سؤال و تلاش خود را همراه بیاورید. در جلسه میتوانید موقعیت را رسم کنید، کمیتها را نام ببرید و یکاها را بررسی کنید. راهنمای معلم فیزیک را ببینید یا جلسهٔ معارفهٔ رایگان ۳۰ دقیقهای درخواست کنید. زمان جلسه پس از پذیرش معلم قطعی میشود.
About this lesson and its review
Published by DoAssignment. This reviewed lesson follows Alberta Grade 11 Physics (Physics 20), expectation 20-C2.4k. It is a study resource, not an official curriculum publication.
Before publication, content is checked for structure, mathematical or chemical notation, calculations, course boundaries, and readability. Errors can still occur, so corrections are welcomed.