DoAssignment study guide

20-D1.1k · Describe oscillations using period and frequency

Learn to describe oscillations using period and frequency through clear examples and targeted practice.

Alberta Grade 11 Physics

Oscillatory Motion and Mechanical Waves

A Grade 11 Physics 20 lesson on how long one cycle takes and how often cycles repeat

Begin with a single object moving back and forth, such as a mass on a spring. The physical system is the object whose motion you are describing. Use a reference frame fixed to the room, so positions are measured relative to the room. Choose the equilibrium position—the central position about which the object moves—as zero. Call the direction to the right positive and the direction to the left negative. Position and displacement are signed quantities: their signs indicate direction. Period and frequency, in contrast, are scalars; they describe time and rate, not direction. This lesson describes oscillations using these two quantities.

What you will learn

  • Describe an oscillation as repeated motion about a central position.
  • Define period and frequency and give their SI units.
  • Use the relationship between period and frequency to solve problems.
  • Read period and frequency from repeated events or a displacement–time graph.

Recognize one complete oscillation

An oscillation is repeated motion back and forth around a central position. A complete oscillation, also called one cycle, occurs when the system returns to the same position and is moving in the same direction as at the start. Passing the central position once is not a complete cycle: the object passes it twice during one full back-and-forth cycle.
A displacement–time graph shows displacement from the central position as time passes. Displacement is a signed distance from that position. A crest is a highest point on the graph; a trough is a lowest point. The time between matching points on neighbouring cycles—for example, one crest and the next crest—is one period. The graph is a way to represent motion, not experimental evidence by itself.
T=time for one complete cycleT=\text{time for one complete cycle}
  • One cycle must include a return to the same position and direction of motion.
  • A period is the time for one complete cycle.
  • Use matching points on successive cycles to find a period.

Period and frequency

The period, represented by TT, is the time taken for one complete oscillation. Its SI unit is the second, symbol s\mathrm{s}. A longer period means each cycle takes more time.
Frequency, represented by ff, is the number of complete oscillations per second. Its SI unit is the hertz, symbol Hz\mathrm{Hz}. One hertz means one cycle per second. Frequency is a scalar and is never negative. A higher frequency means more cycles occur in a given time.
Period and frequency describe the same repeating motion from different viewpoints. If one cycle takes a long time, fewer cycles fit into each second. If many cycles occur each second, each cycle must take less time. Their relationship is reciprocal: multiply period by frequency and the result is one. Keep units attached to values. For example, cycles per second can be written as s−1\mathrm{s^{-1}}, which is equivalent to hertz.
f=1TT=1ff=\frac{1}{T}\qquad T=\frac{1}{f}
  • Period measures time per cycle; frequency measures cycles per second.
  • The SI units are seconds for period and hertz for frequency.
  • A greater period corresponds to a lower frequency.

Find a period or frequency from observations

If you time several complete cycles, divide the total elapsed time by the number of cycles. Timing several cycles can make the estimate less affected by the start and stop of a timer. This calculation describes the supplied timing data; it does not mean that a hypothetical example has been physically measured.
If you know the number of cycles and the total time, frequency is the number of cycles divided by the elapsed time. Then use the reciprocal relationship to find period if needed. On a displacement–time graph, period is the horizontal time separation between matching points. Read the time axis in seconds and check that you have measured a full cycle rather than half a cycle.
Use an appropriate number of significant figures. A calculated value should not suggest more precision than the supplied measurements. Finally, check whether the result makes sense: a period must be a positive time, and a frequency must be a positive number of cycles per second.
T=tNf=NtT=\frac{t}{N}\qquad f=\frac{N}{t}
  • For repeated timing, divide total time by the number of complete cycles to find period.
  • Divide cycle count by elapsed time to find frequency.
  • On a graph, measure the time between matching points on neighbouring cycles.

Keep the description focused

Period and frequency describe timing, not the direction of motion. The object can move to the right or left during an oscillation, but its period and frequency remain positive. A graph can show the changing direction through positive and negative displacement; the period is still read from the time axis.
When reporting an answer, name the quantity and include its unit. If you calculate both quantities, check that their product is one, allowing for rounding. Do not confuse a cycle with a single crossing of the central position. For a complete cycle, the object returns to its starting position and direction.
Tf=1Tf=1
  • Period and frequency are positive scalar descriptions of repeating motion.
  • Use the time axis to find period, then use the reciprocal relationship for frequency.
  • Check units, positivity, and whether the counted motion is a full cycle.

Worked example

Time several complete cycles

A mass on a spring completes 12 full oscillations in 8.4 s. Find its period and frequency. Treat these as hypothetical timing values.
Hypothetical displacement–time graph
Hypothetical displacement–time graphSchematic hypothetical data: successive crests are 0.70 s apart.ABCDETime (s)Displacement (m)Hypothetical values for practice; not measured data.

Schematic hypothetical data: successive crests are 0.70 s apart.

  1. Set up the quantities
    The system is the mass and spring, described relative to the room. The equilibrium position is zero, and right is positive. The cycle count and elapsed time are N=12N=12 cycles and t=8.4 st=8.4\,\mathrm{s}. We need the period and frequency.
  2. Calculate period
    The total time is shared across 12 complete cycles. Dividing gives the time for one cycle. The unit reduces to seconds per cycle, conventionally reported in seconds.
    T=tN=8.4 s12=0.70 sT=\frac{t}{N}=\frac{8.4\,\mathrm{s}}{12}=0.70\,\mathrm{s}
  3. Calculate frequency
    Frequency is the number of cycles per elapsed time. The result is rounded to two significant figures, matching the timing value.
    f=Nt=128.4 s=1.4 Hzf=\frac{N}{t}=\frac{12}{8.4\,\mathrm{s}}=1.4\,\mathrm{Hz}
Answer: The period is 0.70 s0.70\,\mathrm{s} and the frequency is 1.4 Hz1.4\,\mathrm{Hz}.
Check: The period is positive and has units of seconds; frequency is positive and has units of hertz. Their product is approximately 0.980.98, close to one because of rounding. A cycle taking about 0.70 s0.70\,\mathrm{s} corresponds to about 1.4 cycles each second, so the values are reasonable.

Worked example

Read period from a graph

A hypothetical displacement–time graph for an oscillating object shows successive crests at 0.2 s, 1.4 s, 2.6 s, and 3.8 s. Find the period and frequency.
Hypothetical displacement–time graph
Hypothetical displacement–time graphThe plotted positive crests repeat every 1.2 s.CrestCrestCrestCrestTime (s)Displacement (m)Hypothetical graph values for practice; not measured data.

The plotted positive crests repeat every 1.2 s.

  1. Define the motion and reference
    The system is the oscillating object. Measure its displacement from its equilibrium position in a room-based reference frame, with right chosen as positive. The supplied crest times are hypothetical graph readings. The unknowns are period and frequency.
  2. Find the time between crests
    Each crest is the same point in the cycle. The time between neighbouring crests is therefore one complete period. Use a pair of adjacent crests so the interval is a single cycle.
    T=1.4 s−0.2 s=1.2 sT=1.4\,\mathrm{s}-0.2\,\mathrm{s}=1.2\,\mathrm{s}
  3. Find frequency
    Use the reciprocal relationship. The time unit in the denominator becomes cycles per second, or hertz.
    f=1T=11.2 s=0.83 Hzf=\frac{1}{T}=\frac{1}{1.2\,\mathrm{s}}=0.83\,\mathrm{Hz}
Answer: The period is 1.2 s1.2\,\mathrm{s} and the frequency is 0.83 Hz0.83\,\mathrm{Hz}.
Check: The crest intervals are all 1.2 s, so the graph supports a consistent period. The frequency is less than one hertz because each cycle takes more than one second. The units and positive values are appropriate.

Worked example

Find cycle count and period

A hypothetical record states that an object completes 45 oscillations in 30.0 s. Determine its frequency and period, and explain what the count represents.
Hypothetical displacement–time graph
Hypothetical displacement–time graphIllustrative repeating motion with a period of approximately 0.667 s.CrestCrestCrestTime (s)Displacement (m)Hypothetical graph values for practice; not measured data.

Illustrative repeating motion with a period of approximately 0.667 s.

  1. Identify what is counted
    The system is the oscillating object, viewed from a reference frame fixed to the room. Set the equilibrium position as zero and right as positive. The 45 events are complete cycles: each returns to the same position and direction. The elapsed time is 30.0 s30.0\,\mathrm{s}.
  2. Calculate frequency
    Divide the number of complete cycles by the total time. This gives cycles per second, the definition of frequency.
    f=Nt=4530.0 s=1.50 Hzf=\frac{N}{t}=\frac{45}{30.0\,\mathrm{s}}=1.50\,\mathrm{Hz}
  3. Calculate period
    Find the reciprocal of frequency, or divide the total time by the cycle count. Both methods give the time for one complete cycle.
    T=1f=11.50 Hz=0.667 sT=\frac{1}{f}=\frac{1}{1.50\,\mathrm{Hz}}=0.667\,\mathrm{s}
Answer: The frequency is 1.50 Hz1.50\,\mathrm{Hz} and the period is 0.667 s0.667\,\mathrm{s}.
Check: The frequency means 1.50 complete cycles each second. A period of about 0.667 s is consistent with that rate. The frequency is reported to three significant figures; the period is also rounded to three.

Common mistakes and how to avoid them

Calling the time from one crest to the next central-position crossing a period.
Correction: That is only part of a cycle. Use matching points on successive cycles, such as one crest and the next crest.
Using the number of cycles divided by time to calculate period.
Correction: That calculation gives frequency. Period is total time divided by cycle count.
Giving frequency in seconds or allowing it to be negative.
Correction: Frequency is a positive scalar measured in hertz, or cycles per second. Period is the positive time measured in seconds.
Counting a single pass through equilibrium as one complete oscillation.
Correction: A complete oscillation returns to the same position and direction of motion.

Lesson summary

  • An oscillation is repeated motion around a central position.
  • One complete cycle returns the system to the same position and direction.
  • Period TT is time per cycle and is measured in seconds.
  • Frequency ff is cycles per second and is measured in hertz.
  • Use f=1/Tf=1/T and T=1/fT=1/f; for repeated timing, use T=t/NT=t/N and f=N/tf=N/t.

Check your understanding

Question 1

A system completes 6 full cycles in 3.0 s. What is its frequency?
  1. 0.50 Hz
  2. 2.0 Hz
  3. 3.0 Hz
  4. 18 Hz
Show answer and explanation
2.0 Hz
Frequency is cycles divided by time: 6/3.0 s=2.0 Hz6/3.0\,\mathrm{s}=2.0\,\mathrm{Hz}.

Question 2

The time between successive matching crests is 0.25 s. What is the frequency?
  1. 0.25 Hz
  2. 2.5 Hz
  3. 4.0 Hz
  4. 25 Hz
Show answer and explanation
4.0 Hz
The crest-to-crest time is the period. Its reciprocal is 1/(0.25 s)=4.0 Hz1/(0.25\,\mathrm{s})=4.0\,\mathrm{Hz}.

Question 3

Which statement correctly describes one complete oscillation?
  1. The object crosses equilibrium once.
  2. The object reaches one extreme position.
  3. The object returns to its starting position and direction of motion.
  4. The object moves for exactly one second.
Show answer and explanation
The object returns to its starting position and direction of motion.
A full cycle returns the system to the same position and direction. A single crossing or one extreme is only part of a cycle.

Key terms

Oscillation
Repeated motion back and forth around a central position.
Cycle
One complete repeat of an oscillation, ending at the starting position and direction.
Equilibrium position
The central reference position about which the oscillation occurs.
Period
The time taken for one complete cycle; measured in seconds.
Frequency
The number of complete cycles per second; measured in hertz.
Scalar
A quantity described by magnitude alone, without direction.
Displacement–time graph
A graph showing signed displacement from a reference position as time passes.

Continue through Physics 20

View the complete Physics 20 Alberta Grade 11 Physics curriculum and lessons

Tutor support for 20-D1.1k · Describe oscillations using period and frequency

Working on 20-D1.1k · Describe oscillations using period and frequency in Physics 20? Bring the question and your own attempt. In a live session, you can sketch the situation, name the quantities and check the units. Ask about the first step that does not make sense, then try a similar question yourself.

Explore physics tutoring · Request an eligible free 30-minute introduction. Your request is matched by subject and language; a tutor must accept before a time is confirmed.

برای مبحث 20-D1.1k · توصیف نوسان با دوره و بسامد در درس Physics 20، سؤال و تلاش خود را همراه بیاورید. در جلسه می‌توانید موقعیت را رسم کنید، کمیت‌ها را نام ببرید و یکاها را بررسی کنید. راهنمای معلم فیزیک را ببینید یا جلسهٔ معارفهٔ رایگان ۳۰ دقیقه‌ای درخواست کنید. زمان جلسه پس از پذیرش معلم قطعی می‌شود.

About this lesson and its review

Published by DoAssignment. This reviewed lesson follows Alberta Grade 11 Physics (Physics 20), expectation 20-D1.1k. It is a study resource, not an official curriculum publication.

Before publication, content is checked for structure, mathematical or chemical notation, calculations, course boundaries, and readability. Errors can still occur, so corrections are welcomed.

Official curriculum reference

Report a correction or ask a question