DoAssignment study guide

20-D1.5k · Define mechanical resonance

Learn to define mechanical resonance through clear examples and targeted practice.

Alberta Grade 11 Physics

Oscillatory Motion and Mechanical Waves

Recognizing when repeated driving makes an oscillation especially large

Start with a mechanical system: an object or group of objects whose motion we are describing. For example, a swing and its seat can be treated as one system. Describe motion from a reference frame, which is the viewpoint used to observe it. For the swing examples in this lesson, use a frame fixed to the ground and choose forward as the positive direction. Displacement is a vector: it has a size and a direction. Frequency is a scalar: it has a size but no direction. These basics help us describe repeated motion without confusing the motion with its cause.

What you will learn

  • Define mechanical resonance in clear terms.
  • Distinguish a system’s natural frequency from the frequency of an external drive.
  • Identify the key condition for resonance in simple mechanical examples.
  • Explain why a resonance example is hypothetical unless it comes from measured evidence.

Review: oscillations and frequency

An oscillation is repeated motion back and forth around a central position. A swing moving forward and backward is one example. The central position is the position the system passes through between its two farthest positions.
The time for one complete back-and-forth cycle is the period, written as TT. Period is measured in seconds (s). Frequency, written as ff, is the number of complete cycles each second. Its SI unit is the hertz (Hz), where one hertz means one cycle per second.
A system can oscillate on its own after it is moved from its central position and released. The frequency of that motion is its natural frequency. It depends on the system. The natural frequency is not the same as the frequency of every force that might act on the system.
f=1Tf=\frac{1}{T}
  • One complete back-and-forth motion is one cycle.
  • Frequency counts cycles per second; period measures seconds per cycle.
  • Natural frequency describes the system’s own repeated motion.

Mechanical resonance: the key idea

A system can also be driven by a repeated external force. To drive a system means to keep giving it pushes or pulls in a repeated pattern. The number of repeated pushes or pulls each second is the driving frequency.
Mechanical resonance occurs when a system is driven at a frequency equal, or very close, to its natural frequency. Under this condition, the system’s oscillations can become much larger than they would be when driven at a less suitable frequency. In this definition, the matching of frequencies is the essential feature.
For a swing, a person can give repeated pushes. The swing has a natural frequency. If the timing of the pushes matches that frequency, the swing’s motion can grow. Pushing at a different rate is less effective at building a large oscillation. This comparison explains resonance without claiming that every real system reaches the same size of motion.
The push is an external force, and the motion is the response of the system. A schematic picture or a classroom model can help illustrate the idea, but it is not measured evidence. To claim a measured result, an observer would need actual observations or measurements.
fdriving≈fnaturalf_{\text{driving}}\approx f_{\text{natural}}
  • Resonance is a condition involving a driven mechanical system.
  • The driving frequency matches, or is very close to, the system’s natural frequency.
  • At resonance, oscillations can become much larger than under less well-matched driving.

How to identify resonance

First identify the system and the repeated motion. Next identify what is driving it and how often the drive repeats. Then compare the driving frequency with the system’s natural frequency. If they are equal or very close, the system is being driven at or near resonance.
Frequency is a scalar, so it does not point forward or backward. The displacement of an oscillating object is a vector, so its direction matters. A large displacement in one direction does not change the frequency match that defines resonance.
The word “can” matters: resonance can produce larger oscillations, but the definition does not give a particular amplitude or promise a particular size. Amplitude means the greatest displacement from the central position. No amplitude calculation is needed to decide whether the frequencies match.
  • Compare frequencies, not directions of motion.
  • Use “at or near resonance” when the frequencies match or are close.
  • Do not infer a measured amplitude from a schematic or hypothetical example.

Reasoning and evidence

A useful explanation names the physical system, the natural frequency, and the driving frequency. It then states whether the frequencies match and connects that match to the possibility of larger oscillations.
A hypothetical example is an invented set of values used for practice. It can show how to compare two frequencies, but it is not evidence that a real object behaved that way. A schematic figure is a simplified visual, not a measurement. Keep these categories separate when discussing resonance.
  • A clear explanation identifies the system and both frequencies.
  • A hypothetical comparison illustrates the definition; it does not report an experiment.

Worked example

A swing with matched pushes

A swing has a natural frequency of 0.80 Hz. A person gives it repeated pushes at 0.80 Hz. Decide whether the swing is being driven at resonance. Treat the values as hypothetical, not measured.
  1. Name the comparison
    The system is the swing and seat, viewed from the ground. Forward is positive, though the frequency comparison does not depend on direction. The known values are the natural and driving frequencies; the unknown is whether they match.
  2. Compare frequencies
    Resonance occurs when the driving frequency equals, or is very close to, the natural frequency. Here the two hypothetical frequencies are equal.
    fdriving=fnatural=0.80 Hzf_{\text{driving}}=f_{\text{natural}}=0.80\ \text{Hz}
  3. State the result
    The swing is driven at resonance. Its oscillations can become larger than they would under less well-timed pushes. The example does not specify or measure how large they become.
Answer: Yes. The hypothetical driving frequency matches the natural frequency, so the swing is at resonance.
Check: Both values are in hertz, a unit of frequency. Their equality directly satisfies the definition. No direction or amplitude value is required.

Worked example

A drive that is far from the natural frequency

A mechanical oscillator has a natural frequency of 2.0 Hz. It is driven repeatedly at 0.50 Hz. Is it being driven at resonance? The values are hypothetical.
  1. Set the system and known values
    The system is the oscillator, viewed from a frame fixed to its surroundings. Choose one side of its central position as positive. The known frequencies are 2.0 Hz natural and 0.50 Hz driving.
  2. Check for a match
    The definition requires the driving frequency to equal or be close to the natural frequency. The values are not close: the driving frequency is one quarter of the natural frequency.
    0.50 Hz2.0 Hz=0.25\frac{0.50\ \text{Hz}}{2.0\ \text{Hz}}=0.25
  3. Interpret the comparison
    The system is not being driven at or near resonance. The frequency mismatch means this example does not meet the defining condition. This conclusion does not require a claim about a measured amplitude.
Answer: No. The driving frequency is much lower than the natural frequency, so the system is not at or near resonance.
Check: The ratio has no units because hertz divides by hertz. A ratio of 0.25 shows that the two frequencies do not match closely.

Worked example

Close frequencies and careful wording

A machine part has a natural frequency of 5.0 Hz. A repeated external force acts at 4.9 Hz. Decide how to describe the condition. Treat the values as hypothetical.
  1. Identify the system
    The system is the machine part, observed from a frame fixed to the machine. Choose any consistent positive direction for its back-and-forth displacement. The known natural and driving frequencies are 5.0 Hz and 4.9 Hz.
  2. Compare the values
    The frequencies are close. Their difference is 0.1 Hz, which is small compared with a frequency near 5 Hz. The comparison supports describing the drive as near the natural frequency.
    ∣5.0 Hz−4.9 Hz∣=0.1 Hz|5.0\ \text{Hz}-4.9\ \text{Hz}|=0.1\ \text{Hz}
  3. Use accurate wording
    Describe the part as being driven near resonance. The definition allows a frequency that is very close to the natural frequency, not only an exactly equal value. Larger oscillations are possible at or near resonance; no measured motion is supplied here.
Answer: The part is being driven near resonance because the driving frequency is close to its natural frequency.
Check: The subtraction gives a frequency difference in hertz. The values are close on the scale of about 5 Hz, so “near resonance” is reasonable, while claiming a measured increase in motion would not be justified.

Common mistakes and how to avoid them

Calling any repeated motion resonance.
Correction: Repeated motion alone is not enough. Resonance requires a repeated drive whose frequency matches or is close to the system’s natural frequency.
Treating natural frequency and driving frequency as the same idea.
Correction: Natural frequency belongs to the system’s own oscillation. Driving frequency describes how often the external force repeats.
Claiming that resonance always produces a known or measured large amplitude.
Correction: The definition says oscillations can become much larger. A specific size requires information about the system and evidence from observation or measurement.
Treating a hypothetical example or drawing as experimental evidence.
Correction: Label invented values as hypothetical and simplified visuals as schematic. Neither is a report of measured results.

Lesson summary

  • Mechanical resonance is a condition in which a mechanical system is driven at a frequency equal or very close to its natural frequency.
  • At or near resonance, the system’s oscillations can become much larger than under less well-matched driving.
  • Frequency is measured in hertz. It is a scalar, unlike displacement, which has direction.
  • State whether an example is hypothetical, schematic, or based on actual measurements.

Check your understanding

Question 1

A system has a natural frequency of 3.0 Hz and is driven at 3.0 Hz. Which statement best fits the definition?
  1. It is driven at resonance.
  2. It cannot oscillate because the frequencies match.
  3. It is not at resonance because frequency has no direction.
  4. Its amplitude is known to be exactly 3.0 m.
Show answer and explanation
It is driven at resonance.
The driving and natural frequencies are equal, which meets the defining condition. The information does not specify amplitude.

Question 2

A system’s natural frequency is 4.0 Hz. Which drive is closest to resonance?
  1. A drive at 0.40 Hz
  2. A drive at 2.0 Hz
  3. A drive at 3.9 Hz
  4. A drive at 8.0 Hz
Show answer and explanation
A drive at 3.9 Hz
The driving frequency of 3.9 Hz is closest to the natural frequency of 4.0 Hz, so it is the closest to the resonance condition.

Question 3

A drawing shows a large oscillation but gives no frequency information. What can you conclude about resonance?
  1. Resonance is proven because the drawing is large.
  2. Resonance is proven because all oscillations are resonant.
  3. The drawing alone does not establish resonance; compare driving and natural frequencies.
  4. The drawing gives measured evidence of the natural frequency.
Show answer and explanation
The drawing alone does not establish resonance; compare driving and natural frequencies.
Resonance is identified by comparing the driving frequency with the natural frequency. A schematic drawing alone is not frequency evidence.

Key terms

Oscillation
Repeated back-and-forth motion around a central position.
Cycle
One complete repetition of an oscillation.
Period
The time for one complete cycle, measured in seconds.
Frequency
The number of cycles per second, measured in hertz.
Natural frequency
The frequency at which a system oscillates on its own after it is displaced and released.
Driving frequency
The number of repeated external pushes or pulls per second.
Mechanical resonance
The condition in which a mechanical system is driven at a frequency equal or very close to its natural frequency.
Amplitude
The greatest displacement from the central position.

Continue through Physics 20

View the complete Physics 20 Alberta Grade 11 Physics curriculum and lessons

Tutor support for 20-D1.5k · Define mechanical resonance

Working on 20-D1.5k · Define mechanical resonance in Physics 20? Bring the question and your own attempt. In a live session, you can sketch the situation, name the quantities and check the units. Ask about the first step that does not make sense, then try a similar question yourself.

Explore physics tutoring · Request an eligible free 30-minute introduction. Your request is matched by subject and language; a tutor must accept before a time is confirmed.

برای مبحث 20-D1.5k · تعریف تشدید مکانیکی در درس Physics 20، سؤال و تلاش خود را همراه بیاورید. در جلسه می‌توانید موقعیت را رسم کنید، کمیت‌ها را نام ببرید و یکاها را بررسی کنید. راهنمای معلم فیزیک را ببینید یا جلسهٔ معارفهٔ رایگان ۳۰ دقیقه‌ای درخواست کنید. زمان جلسه پس از پذیرش معلم قطعی می‌شود.

About this lesson and its review

Published by DoAssignment. This reviewed lesson follows Alberta Grade 11 Physics (Physics 20), expectation 20-D1.5k. It is a study resource, not an official curriculum publication.

Before publication, content is checked for structure, mathematical or chemical notation, calculations, course boundaries, and readability. Errors can still occur, so corrections are welcomed.

Official curriculum reference

Report a correction or ask a question