20-D1.3k · Relate displacement, acceleration, velocity, and time in simple harmonic motion
Learn to relate displacement, acceleration, velocity, and time in simple harmonic motion through clear examples and targeted practice.
Alberta Grade 11 Physics
Oscillatory Motion and Mechanical Waves
How an oscillator’s position and motion change with time
Picture a cart attached to a spring, moving back and forth along a straight track. The cart and spring are the physical system. We use the track as our reference frame: it is the set of positions from which we describe the cart’s motion. Choose the equilibrium position, where the cart would rest, as zero displacement, and choose right as positive. Displacement, velocity, and acceleration are vectors, so each has a direction as well as a size. In one dimension, a positive or negative sign shows that direction. Time, period, and amplitude are scalars: they have size but no direction. Simple harmonic motion, or SHM, is a repeating back-and-forth motion in which acceleration points toward equilibrium and grows in size with distance from equilibrium. The equations in this lesson describe an ideal SHM model.
What you will learn
Describe displacement, velocity, and acceleration as vectors with signs set by a chosen positive direction.
Use period and amplitude to relate an oscillator’s displacement, velocity, acceleration, and time.
Interpret how velocity and acceleration change as an object moves through simple harmonic motion.
The quantities and the repeating pattern
Displacement, written x, is the object’s position relative to equilibrium. It is measured in metres (m). The greatest distance from equilibrium is the amplitude, A, also measured in metres. A full return to the same position moving in the same direction takes one period, T, measured in seconds (s). Frequency, f, is the number of complete cycles per second, measured in hertz (Hz). They are related by f=1/T.
Velocity, v, describes how quickly displacement changes and in which direction the object moves. Its SI unit is metres per second (m/s). Acceleration, a, describes how quickly velocity changes. Its SI unit is metres per second squared (m/s2). A negative value does not mean a smaller amount; it means the vector points opposite to the chosen positive direction.
In SHM, acceleration always points toward equilibrium. At either endpoint, displacement has its greatest size and velocity is zero for an instant. Acceleration has its greatest size there. At equilibrium, displacement is zero, acceleration is zero, and speed is greatest. Between these positions, the directions and sizes change smoothly.
f=T1
Use the same equilibrium point and positive direction for every quantity.
Amplitude is the largest displacement; period is the time for one complete cycle.
Velocity and acceleration are vectors. Time, amplitude, and period are scalars.
A model that connects displacement, velocity, acceleration, and time
For an ideal oscillator, the displacement at time t can be represented with a cosine pattern. Here, t=0 is chosen when the object is at its positive endpoint. The angular frequency, ω, tells how quickly the cycle repeats. It is measured in radians per second (rad/s); radians are a way of measuring angles.
The velocity and acceleration patterns follow from the same SHM model. Their signs depend on the chosen positive direction and on when the clock starts. With the stated starting position, velocity is zero at the positive endpoint and becomes negative as the object moves back toward equilibrium. Acceleration is also negative at that endpoint, because it points toward equilibrium. At the negative endpoint, both signs reverse.
These equations provide a direct way to find each quantity at a stated time. First find the phase, ωt, using time in seconds. Then use the trigonometric values. The velocity equation has units of metres per second because amplitude times angular frequency has those units. The acceleration equation has units of metres per second squared because amplitude times angular frequency squared has those units.
A displacement–time graph for this model is a cosine-shaped curve. A velocity–time graph has the same period but is shifted by one quarter of a cycle. Acceleration has the same period as displacement, but has the opposite sign at each time. A graph is a representation of the model, not evidence from a measurement.
ω=T2π,x=Acos(ωt),v=−Aωsin(ωt),a=−Aω2cos(ωt)
The equations assume SHM and start the clock at the positive endpoint.
The minus signs show vector direction under the chosen convention.
Use seconds, metres, and consistent units when substituting.
Reading the relationships through a cycle
At t=0, the object is at x=+A. Its velocity is zero, and its acceleration is negative. At one quarter of a period, the object passes equilibrium moving in the negative direction. Its displacement and acceleration are zero, while its velocity has its greatest negative value.
At half a period, the object reaches the negative endpoint. Its velocity is momentarily zero and its acceleration points in the positive direction. At three quarters of a period, it passes equilibrium moving in the positive direction. The pattern repeats after one period.
The equation a=−ω2x is a compact way to state the key direction relationship. If displacement is positive, acceleration is negative; if displacement is negative, acceleration is positive. The acceleration’s size is proportional to the displacement’s size. This relationship applies to the ideal SHM model, not to every repeating motion.
a=−ω2x
Velocity is greatest in size at equilibrium and zero at the endpoints.
Acceleration is zero at equilibrium and greatest in size at the endpoints.
Acceleration and displacement always have opposite signs in this model.
A reliable solving method
Begin by naming the oscillator and its reference frame. State which direction is positive and identify equilibrium. List the given quantities and the requested quantity. Check that the time is measured from the stated starting point. Find ω from the period before evaluating the equations.
Keep the sign through the calculation. A negative velocity means motion in the negative direction. A negative acceleration means acceleration in the negative direction. Report the size, direction, and SI unit in words as well as with the signed value when helpful.
Finally, check the result against the cycle. For example, a velocity of zero at an endpoint is reasonable, but a nonzero velocity there would not match this model. Check units and whether the sign agrees with the position and direction of motion.
Define the system, reference frame, equilibrium, and positive direction first.
Calculate the angular frequency and phase before substituting.
Check units, signs, and whether the result fits the oscillator’s position in its cycle.
Worked example
Finding motion partway through a cycle
A cart oscillates horizontally on a spring. Let equilibrium be x=0 and right be positive. The cart starts at its positive endpoint at t=0. Its amplitude is 0.080m and its period is 2.0s. Find displacement, velocity, and acceleration at t=0.50s.
Hypothetical displacement–time model
The curve is a model, not measured data. The marked point is the equilibrium crossing at 0.50 s.
Set the model and find angular frequency
The cart is the system, the track is the reference frame, and right is positive. The clock starts at the positive endpoint, so the stated SHM equations apply. The unknowns are displacement, velocity, and acceleration at the given time.
ω=2.0s2π=3.1rad/s
Evaluate the phase
At half a second, the cart has completed one quarter of a cycle. The phase is a quarter-turn, so the cosine is zero and the sine is one.
ωt=T2πt=2π
Calculate the three quantities
Substitute the amplitude, angular frequency, and time into each model equation. The negative velocity means the cart is moving left. Zero acceleration is expected as it passes equilibrium.
x=0m,v=−(0.080m)(3.1rad/s)=−0.25m/s,a=0m/s2
Answer: At 0.50s, the cart is at equilibrium: x=0m. It moves left at 0.25m/s, so v=−0.25m/s. Its acceleration is 0m/s2.
Check: The cart is at equilibrium after one quarter-period, where speed is greatest and acceleration is zero. The velocity sign agrees with motion back from the positive endpoint. Units match displacement, velocity, and acceleration.
Worked example
Finding acceleration from displacement
A mass on a spring has period 1.6s. At one instant it is 0.030m to the left of equilibrium. Right is positive. Find its acceleration at that instant.
Assign the signed displacement
The mass and spring are the system, and the track is the reference frame. Since left is opposite to the positive direction, its displacement is negative. The unknown is acceleration; its direction follows from the SHM relationship.
x=−0.030m
Use the acceleration relationship
Find angular frequency from the period, then use the relationship between acceleration and displacement. The acceleration must point opposite to the negative displacement.
Answer: The acceleration is 0.46m/s2 to the right.
Check: The displacement is left of equilibrium, so acceleration must point right, toward equilibrium. Angular frequency squared times metres gives metres per second squared.
Worked example
Using a velocity at a known phase
An oscillator starts at its positive endpoint and has amplitude 0.12m and period 3.0s. Find its velocity at t=0.75s, and state its direction.
Identify the phase
The oscillator is the system, and its line of motion is the reference frame. Right is positive. The time is one quarter of the period, so the oscillator is crossing equilibrium toward the negative direction.
ω=3.0s2π=2.1rad/s,ωt=2π
Find the velocity
At this phase the sine equals one. Substitution in the velocity model gives a negative value, consistent with motion to the left.
v=−(0.12m)(2.1rad/s)sin(2π)=−0.25m/s
Answer: The velocity is −0.25m/s, or 0.25m/s to the left.
Check: One quarter-period after the positive endpoint, the oscillator passes equilibrium at its greatest speed. The calculated speed equals Aω and has velocity units.
Common mistakes and how to avoid them
Treating a negative velocity as negative speed.
Correction: Speed is a non-negative scalar. The velocity sign gives direction; for example, −0.25m/s means moving left when right is positive.
Saying acceleration is always opposite to velocity.
Correction: In SHM, acceleration is opposite to displacement, not always to velocity. The object speeds up while moving toward equilibrium and slows down while moving away from it.
Using time in minutes or forgetting when the clock starts.
Correction: Use seconds and match the time origin to the stated starting position. The equations shown assume the object starts at its positive endpoint.
Expecting velocity to be greatest at an endpoint.
Correction: Velocity is zero for an instant at each endpoint. Its greatest size occurs as the object passes equilibrium.
Lesson summary
Choose equilibrium, a reference frame, and a positive direction before assigning signs.
The period sets the cycle time; angular frequency is 2π/T.
For the stated starting position, displacement, velocity, and acceleration follow the SHM model equations.
Acceleration points toward equilibrium: a=−ω2x.
Check the phase, direction, SI units, and whether the result fits the oscillator’s position in its cycle.
Check your understanding
Question 1
An oscillator starts at its positive endpoint. At one quarter of a period, which statement is correct?
It is at positive maximum displacement with zero velocity.
It passes equilibrium with its greatest speed.
It is at negative maximum displacement with zero acceleration.
It passes equilibrium with greatest acceleration.
Show answer and explanation
It passes equilibrium with its greatest speed.
After one quarter-period the object passes equilibrium. Displacement and acceleration are zero there, and speed is greatest.
Question 2
Right is positive. At an instant, an SHM object has negative displacement. Which way does its acceleration point?
Left, because acceleration always has the same sign as displacement.
Right, toward equilibrium.
It has no direction because displacement is negative.
Either direction; the displacement gives no information.
Show answer and explanation
Right, toward equilibrium.
Acceleration is opposite in sign to displacement in SHM. Negative displacement therefore means positive, rightward acceleration.
Question 3
A model gives a=−0.60m/s2. Right is positive. What does the sign tell you?
The object is moving left at 0.60m/s.
The object has acceleration toward the left.
The object is 0.60m left of equilibrium.
The object’s speed is decreasing.
Show answer and explanation
The object has acceleration toward the left.
Acceleration is a vector, and its negative sign indicates leftward acceleration. The value alone does not determine velocity, displacement, or whether speed is increasing.
Key terms
Simple harmonic motion (SHM)
Repeating back-and-forth motion in which acceleration points toward equilibrium and is proportional to displacement.
Equilibrium
The central position about which an oscillator moves; it is chosen as zero displacement in this lesson.
Displacement
A signed position relative to a reference point, measured in metres.
Amplitude
The greatest distance an oscillator reaches from equilibrium.
Period
The time taken for one complete cycle.
Frequency
The number of complete cycles per second, measured in hertz.
Angular frequency
A measure of how quickly an oscillator completes its repeating cycle, calculated as 2π/T.
Phase
The position within the repeating cycle, represented here by the angle ωt.
Tutor support for 20-D1.3k · Relate displacement, acceleration, velocity, and time in simple harmonic motion
Working on 20-D1.3k · Relate displacement, acceleration, velocity, and time in simple harmonic motion in Physics 20? Bring the question and your own attempt. In a live session, you can represent the quantities clearly, explain the operation you chose, and estimate whether the answer is reasonable. Ask about the first step that does not make sense, then try a similar question yourself.
برای مبحث 20-D1.3k · ارتباط جابهجایی، شتاب، سرعت و زمان در حرکت هماهنگ ساده در درس Physics 20، سؤال و تلاش خود را همراه بیاورید. در جلسه میتوانید کمیتها را روشن نمایش دهید، دلیل انتخاب عمل را توضیح دهید و معقول بودن پاسخ را برآورد کنید. راهنمای معلم فیزیک را ببینید یا جلسهٔ معارفهٔ رایگان ۳۰ دقیقهای درخواست کنید. زمان جلسه پس از پذیرش معلم قطعی میشود.
About this lesson and its review
Published by DoAssignment. This reviewed lesson follows Alberta Grade 11 Physics (Physics 20), expectation 20-D1.3k. It is a study resource, not an official curriculum publication.
Before publication, content is checked for structure, mathematical or chemical notation, calculations, course boundaries, and readability. Errors can still occur, so corrections are welcomed.