DoAssignment study guide

20-D1.4k · Relate kinetic, potential, and total energy in simple harmonic motion

Learn to relate kinetic, potential, and total energy in simple harmonic motion through clear examples and targeted practice.

Alberta Grade 11 Physics

Oscillatory Motion and Mechanical Waves

How kinetic, potential, and total energy are related in an ideal spring–mass system

The system in this lesson is an ideal horizontal spring and its attached mass. We observe it from a stationary laboratory frame. Choose the spring’s equilibrium position as x=0x=0, with positive displacement to the right. Position and velocity are vectors because they include direction. Energy is a scalar: it has a value but no direction. We assume the surface is frictionless and the spring is ideal, so total mechanical energy stays constant. These are model assumptions, not claims about every real spring.

What you will learn

  • Describe how kinetic and potential energy change during simple harmonic motion.
  • Use conservation of mechanical energy to relate kinetic, potential, and total energy.
  • Calculate energy or speed at a position in an ideal spring–mass oscillation.

1. The system and its energy model

Simple harmonic motion, or SHM, is repeating back-and-forth motion about an equilibrium position. Equilibrium is the position where the object would stay at rest if placed there and left undisturbed. The amplitude, written AA, is the greatest distance from equilibrium.
Kinetic energy is energy of motion. For mass mm and speed vv, kinetic energy is Ek=12mv2E_k=\frac{1}{2}mv^2. Mass is measured in kilograms, speed in metres per second, and energy in joules. Speed is the size of velocity. Unlike velocity, speed does not include direction.
A spring stores elastic potential energy when it is stretched or compressed. If its displacement from equilibrium is xx and its spring constant is kk, then Ep=12kx2E_p=\frac{1}{2}kx^2. The spring constant, measured in newtons per metre, describes how stiff the spring is. Because displacement is squared, equal stretches and compressions store equal energy.
Total mechanical energy is the sum of kinetic and potential energy. In this ideal model, the total is constant. Energy shifts between the spring and the moving mass, but the total does not change. The relationship applies throughout the motion, not only at the endpoints.
ET=Ek+Ep=12mv2+12kx2E_T=E_k+E_p=\frac{1}{2}mv^2+\frac{1}{2}kx^2
  • At equilibrium, displacement is zero and spring potential energy is zero.
  • At a turning point, the mass is momentarily at rest.
  • In the ideal model, total mechanical energy remains constant.

2. How energy changes during an oscillation

Imagine releasing the mass from rest at one turning point. Its displacement is the amplitude, and its speed is zero. Therefore, all the mechanical energy is spring potential energy at that instant.
As the mass moves toward equilibrium, the spring’s stored energy decreases while the mass’s kinetic energy increases. At equilibrium, spring displacement is zero. The mass has its greatest speed, so kinetic energy is greatest and potential energy is zero.
The mass continues past equilibrium and moves toward the opposite turning point. It slows down as the spring stores more energy. At that turning point, the mass again has zero speed, and all the energy is potential energy. The same energy changes happen on the return trip.
For example, if total energy is 0.20 J0.20\,\mathrm{J} and potential energy at a position is 0.05 J0.05\,\mathrm{J}, kinetic energy there is 0.15 J0.15\,\mathrm{J}. Both energy forms are non-negative because their equations use squared speed and squared displacement.
Energy does not show which way the mass is moving. At a given displacement, it can pass moving right and later pass moving left. Its energy values are the same at those two moments, even though its velocity directions are opposite. The total energy remains constant throughout the ideal oscillation.
  • At a turning point, Ek=0E_k=0 and Ep=ETE_p=E_T.
  • At equilibrium, Ep=0E_p=0 and Ek=ETE_k=E_T.
  • Between those positions, both energy forms are present.

3. Solving energy questions

First identify the system, reference frame, positive direction, known values, and unknown. Decide whether the mass is at equilibrium, at a turning point, or between them. This tells you which energy values are zero.
Use the total-energy relationship before substituting. If the mass starts from rest at amplitude AA, its total energy is the spring energy at that point. At a later displacement xx, subtract the spring potential energy from the total to find kinetic energy.
If kinetic energy is known and speed is required, rearrange the kinetic-energy equation. The result is speed, a non-negative magnitude. Energy alone cannot tell whether the velocity points right or left. Use the motion description and the chosen positive direction to state that direction.
Keep units in every substitution. A joule is equivalent to a kilogram metre squared per second squared. Check that kinetic energy is not negative and does not exceed total energy. Speed should be greatest at equilibrium and zero at a turning point.
Ek=ET−EpE_k=E_T-E_p
  • Use energy conservation to find the energy form that is not given.
  • Use speed, not signed velocity, in the kinetic-energy equation.
  • Check that each energy value fits between zero and the constant total.

Worked example

Energy at a turning point

An ideal spring has k=80 N/mk=80\,\mathrm{N/m}. A mass is released from rest at amplitude A=0.10 mA=0.10\,\mathrm{m}. Find the total energy and the energy forms at release.
Energy at release and equilibrium
Energy at release and equilibriumIdealized energy account. Values are calculated, not measured.0.4 JRelease at amplitude0.4 JAt equilibriumKU

Idealized energy account. Values are calculated, not measured.

  1. Identify the state
    The system is the ideal spring and mass in a stationary frame. Positive displacement is to the right. The mass starts from rest at a turning point, so its kinetic energy is zero. The known values are spring constant and amplitude; find total energy.
  2. Use the energy model
    At the turning point, all mechanical energy is spring potential energy.
    ET=Ep=12kA2E_T=E_p=\frac{1}{2}kA^2
  3. Substitute and interpret
    The units reduce to joules. Since the mass is released from rest, all this energy is potential energy at release.
    ET=12(80 N/m)(0.10 m)2=0.40 JE_T=\frac{1}{2}(80\,\mathrm{N/m})(0.10\,\mathrm{m})^2=0.40\,\mathrm{J}
Answer: At release, ET=0.40 JE_T=0.40\,\mathrm{J}, Ep=0.40 JE_p=0.40\,\mathrm{J}, and Ek=0 JE_k=0\,\mathrm{J}.
Check: The units are joules. Zero kinetic energy is reasonable because the mass is released from rest at a turning point.

Worked example

Find speed between equilibrium and a turning point

A 0.50 kg0.50\,\mathrm{kg} mass oscillates on an ideal spring with k=40 N/mk=40\,\mathrm{N/m} and amplitude 0.20 m0.20\,\mathrm{m}. Find its speed when its displacement is 0.12 m0.12\,\mathrm{m}.
Energy at three positions
Energy at three positionsEnergy values for the ideal spring–mass model.0.8 JTurning point0.8 JAt x = 0.12 m0.8 JEquilibriumKU

Energy values for the ideal spring–mass model.

  1. Set the system and known values
    The system is the ideal spring and mass in a stationary frame, with positive displacement to the right. The known values are mass, spring constant, amplitude, and displacement. The requested quantity is speed.
  2. Find total and potential energy
    The mass starts from rest at amplitude, so total energy is the spring energy there. Calculate the potential energy again at the stated displacement. Keep units in both substitutions.
    ET=12(40 N/m)(0.20 m)2=0.80 J,Ep=12(40 N/m)(0.12 m)2=0.288 JE_T=\frac{1}{2}(40\,\mathrm{N/m})(0.20\,\mathrm{m})^2=0.80\,\mathrm{J},\quad E_p=\frac{1}{2}(40\,\mathrm{N/m})(0.12\,\mathrm{m})^2=0.288\,\mathrm{J}
  3. Find kinetic energy and speed
    Subtract potential energy from the constant total. Then use the kinetic-energy relationship. The calculation gives speed, not direction.
    Ek=0.80 J−0.288 J=0.512 J,v=2(0.512 J)0.50 kg=1.43 m/sE_k=0.80\,\mathrm{J}-0.288\,\mathrm{J}=0.512\,\mathrm{J},\quad v=\sqrt{\frac{2(0.512\,\mathrm{J})}{0.50\,\mathrm{kg}}}=1.43\,\mathrm{m/s}
Answer: To two significant figures, the speed is 1.4 m/s1.4\,\mathrm{m/s}. The kinetic energy is 0.512 J0.512\,\mathrm{J} and the potential energy is 0.288 J0.288\,\mathrm{J}.
Check: The energies add to 0.800 J0.800\,\mathrm{J}, the total. The speed is less than the speed at equilibrium, which is reasonable because some energy is still potential. The speed unit is metres per second.

Worked example

Compare energy forms at a position

An ideal spring–mass system has total energy 0.60 J0.60\,\mathrm{J}. At a certain position, spring potential energy is 0.15 J0.15\,\mathrm{J}. Find the kinetic energy and the fraction of total energy that is kinetic.
Energy at the stated position
Energy at the stated positionThe two energy forms add to the constant total.0.6 JStated position0.6 JTotalKU

The two energy forms add to the constant total.

  1. Identify what is known
    The system is the ideal spring and mass in a stationary frame. Positive displacement is to the right, although direction is not needed for scalar energy. Total energy and potential energy are given.
  2. Use conservation of energy
    The total is the sum of the two energy forms. Subtract potential energy to find kinetic energy.
    Ek=ET−Ep=0.60 J−0.15 J=0.45 JE_k=E_T-E_p=0.60\,\mathrm{J}-0.15\,\mathrm{J}=0.45\,\mathrm{J}
  3. Compare the amounts
    Divide kinetic energy by total energy to find the fraction. The joule units cancel, so the fraction has no units.
    EkET=0.45 J0.60 J=0.75=75%\frac{E_k}{E_T}=\frac{0.45\,\mathrm{J}}{0.60\,\mathrm{J}}=0.75=75\%
Answer: The kinetic energy is 0.45 J0.45\,\mathrm{J}, or 75% of the total energy.
Check: The kinetic and potential energies add to 0.60 J0.60\,\mathrm{J}. Both are non-negative and neither exceeds the total.

Common mistakes and how to avoid them

Saying total energy decreases when kinetic energy decreases.
Correction: In the ideal model, a decrease in one energy form is matched by an increase in the other. Their sum stays constant.
Saying velocity is zero at equilibrium because displacement is zero.
Correction: At equilibrium, spring potential energy is zero and speed is greatest. Displacement and velocity describe different features of motion.
Assigning negative kinetic or potential energy because the mass is on the negative side.
Correction: The equations use squared speed and squared displacement. Both energy forms are non-negative in this model.
Using energy to decide whether the mass is moving left or right.
Correction: Energy is scalar and does not include direction. Use the motion description and the sign convention to state direction.

Lesson summary

  • For an ideal spring–mass oscillator, total mechanical energy is the sum of kinetic and elastic potential energy.
  • At a turning point, energy is all potential; at equilibrium, it is all kinetic.
  • Between those positions, energy is shared while the total stays constant.
  • Energy calculations give speed magnitude, not direction.

Check your understanding

Question 1

At a turning point in an ideal spring–mass oscillation, which statement is correct?
  1. Kinetic energy is zero and potential energy equals total energy.
  2. Potential energy is zero and kinetic energy equals total energy.
  3. Both kinetic and potential energy are zero.
  4. Kinetic energy is greater than total energy.
Show answer and explanation
Kinetic energy is zero and potential energy equals total energy.
The mass is momentarily at rest at a turning point, so kinetic energy is zero. The total is stored as spring potential energy.

Question 2

A system has total energy 0.50 J0.50\,\mathrm{J} and potential energy 0.20 J0.20\,\mathrm{J} at one position. What is its kinetic energy?
  1. 0.30 J0.30\,\mathrm{J}
  2. 0.70 J0.70\,\mathrm{J}
  3. 0.20 J0.20\,\mathrm{J}
  4. 0 J0\,\mathrm{J}
Show answer and explanation
0.30 J0.30\,\mathrm{J}
Subtract potential energy from total energy: 0.50 J−0.20 J=0.30 J0.50\,\mathrm{J}-0.20\,\mathrm{J}=0.30\,\mathrm{J}.

Question 3

At the same nonzero displacement, the mass passes once moving right and once moving left. In the ideal model, what is the same at both moments?
  1. Its kinetic and potential energies
  2. Its velocity direction only
  3. Its displacement sign only
  4. Its total energy is zero
Show answer and explanation
Its kinetic and potential energies
At the same displacement, the mass has the same speed magnitude in the ideal motion. The energies are the same even though the velocity directions are opposite.

Key terms

Amplitude
The greatest displacement from equilibrium during an oscillation.
Equilibrium position
The central position where the spring–mass system can remain at rest if undisturbed.
Kinetic energy
Energy an object has because it is moving.
Elastic potential energy
Energy stored in a spring when it is stretched or compressed.
Total mechanical energy
The sum of kinetic and potential energy in the system.
Turning point
An end position in the oscillation where the object changes direction and its instantaneous speed is zero.

Continue through Physics 20

View the complete Physics 20 Alberta Grade 11 Physics curriculum and lessons

Tutor support for 20-D1.4k · Relate kinetic, potential, and total energy in simple harmonic motion

Working on 20-D1.4k · Relate kinetic, potential, and total energy in simple harmonic motion in Physics 20? Bring the question and your own attempt. In a live session, you can sketch the situation, name the quantities and check the units. Ask about the first step that does not make sense, then try a similar question yourself.

Explore physics tutoring · Request an eligible free 30-minute introduction. Your request is matched by subject and language; a tutor must accept before a time is confirmed.

برای مبحث 20-D1.4k · ارتباط انرژی جنبشی، پتانسیل و کل در حرکت هماهنگ ساده در درس Physics 20، سؤال و تلاش خود را همراه بیاورید. در جلسه می‌توانید موقعیت را رسم کنید، کمیت‌ها را نام ببرید و یکاها را بررسی کنید. راهنمای معلم فیزیک را ببینید یا جلسهٔ معارفهٔ رایگان ۳۰ دقیقه‌ای درخواست کنید. زمان جلسه پس از پذیرش معلم قطعی می‌شود.

About this lesson and its review

Published by DoAssignment. This reviewed lesson follows Alberta Grade 11 Physics (Physics 20), expectation 20-D1.4k. It is a study resource, not an official curriculum publication.

Before publication, content is checked for structure, mathematical or chemical notation, calculations, course boundaries, and readability. Errors can still occur, so corrections are welcomed.

Official curriculum reference

Report a correction or ask a question