DoAssignment study guide

20-D2.7k · Explain reflection of mechanical waves

Learn to explain reflection of mechanical waves through clear examples and targeted practice.

Alberta Grade 11 Physics

Oscillatory Motion and Mechanical Waves

How waves behave when they meet a boundary

A mechanical wave is a disturbance that travels through matter, such as air, water, or a rope. Reflection happens when a wave reaches a boundary and travels back into the material it came from. In this lesson, the system is the wave and the medium carrying it. Treat the boundary as stationary in the medium's reference frame. For a straight path, choose the direction toward the boundary as positive. Angles are measured from the normal, an imaginary line at right angles to the boundary. These choices make it easier to describe what changes and what stays the same.

What you will learn

  • Describe reflection of a mechanical wave at a boundary.
  • Use the law of reflection to compare incoming and reflected directions.
  • Explain how a fixed or free end affects a reflected pulse.
  • Use an echo to find the distance to a reflecting surface.

What reflection means

A boundary is the place where one medium ends or where one medium meets another material. When a wave reaches a boundary, some or all of its energy may be reflected. The reflected wave travels away from the boundary through the original medium. This differs from transmission, in which wave energy continues into or through the boundary. A real boundary can reflect and transmit energy at the same time.
A wave transfers energy, not matter from one end to the other. The medium's particles move around their usual positions as the disturbance passes. For a travelling pulse on a rope, the pulse moves along the rope while each small part of rope moves mainly up and down. Wave propagation means the travel of the disturbance. Particle motion means movement of the medium. They are not the same motion.
A scalar has magnitude only, such as wave speed. A vector has magnitude and direction, such as the velocity of a travelling pulse. Reflection changes the direction of travel. Depending on the boundary, it can also change a pulse's orientation, as described below.
v=dtv=\frac{d}{t}
  • Reflection sends a wave back from a boundary into its original medium.
  • A boundary may also transmit some wave energy.
  • Wave travel and particle motion are different motions.

Direction of reflection

For a wave meeting a flat surface, draw the normal at the point where it arrives. The incident wave is the incoming wave. The reflected wave travels away after the meeting. The angle of incidence is between the incoming direction and the normal. The angle of reflection is between the reflected direction and the normal.
For reflection from a flat boundary, the angle of reflection equals the angle of incidence. Both angles are measured from the normal, not from the surface. The incoming and reflected directions lie on opposite sides of the normal. This rule describes direction; it does not tell you how much energy is reflected.
The rule applies to mechanical waves, including sound and surface waves, when they reflect from a boundary. For a straight-line echo from a large, flat wall, sound returns along the same line if it arrives perpendicular to the wall. If it arrives at an angle, it reflects at the matching angle on the other side of the normal.
θr=θi\theta_r=\theta_i
  • Draw the normal before measuring reflection angles.
  • The angle of reflection equals the angle of incidence.
  • Measure both angles from the normal.

Reflection at the ends of a rope

A pulse on a rope shows how a boundary affects a reflected wave. A pulse is a short disturbance that travels through a medium. At a fixed end, the rope cannot move up or down at its attachment. An upward pulse reflects upside down: it returns as a downward pulse. This reversal is called inversion. The reflected pulse still travels back along the rope.
At a free end, the end of the rope can move. An upward pulse reflects without turning upside down. The reflected pulse returns upward. In both cases, the pulse's direction of travel reverses along the rope. The difference is whether the pulse is inverted.
A pulse's shape and size can also be affected by the rope and boundary. In simple examples, focus on direction of travel and whether the pulse is inverted. A schematic drawing represents a model; it is not measured evidence from an experiment.
  • A fixed end reflects a pulse inverted.
  • A free end reflects a pulse without inversion.
  • For either end, the reflected pulse travels back along the rope.

Using an echo

An echo is reflected sound heard after the original sound. If sound travels to a wall and back, the measured time is for the full return trip. The wall's distance is therefore half the total distance travelled by the sound.
To solve an echo problem, define the sound's path and identify what the time measures. Use the sound speed in the stated medium and elapsed time. Keep units consistent: speed in metres per second and time in seconds give distance in metres. Distance is a scalar. The sound's velocity is a vector: it points toward the wall on the outward trip and away from it on the return trip.
Echo calculations assume sound follows the stated path and that the measured delay is its travel time. A calculation alone does not establish that an actual measurement took place.
dwall=vt2d_{\text{wall}}=\frac{vt}{2}
  • Echo time includes the outward and return trips.
  • Find total travel distance first, then divide by two for the wall distance.
  • Check that the final distance is reasonable for the sound speed and time.

Worked example

A pulse at a fixed end

A student sends an upward pulse along a rope toward a fixed end. Describe the reflected pulse's direction of travel and orientation.
Fixed-end pulse reflection
Fixed-end pulse reflectionSchematic: an upward pulse returns inverted from a fixed end. Not measured data.λ = 1 mA = 0.05 m← Position along rope (m)Displacement (m)Schematic; no measured data.

Schematic: an upward pulse returns inverted from a fixed end. Not measured data.

  1. Set the direction
    Take the rope as the medium and the fixed end as the boundary. Let positive direction be toward the fixed end. The incident pulse travels in the positive direction.
  2. Apply the fixed-end rule
    At a fixed end, the rope cannot move at the attachment, so the reflected pulse is inverted. Its direction of travel is back along the rope, opposite to the incident direction.
    v⃗r=−v⃗i\vec v_r=-\vec v_i
Answer: The reflected pulse travels away from the fixed end and is inverted: an upward incident pulse returns as a downward pulse.
Check: The pulse reverses its travel direction, and its vertical orientation reverses because the end is fixed.

Worked example

A pulse at a free end

An upward pulse moves to the right along a rope and reaches a free end. State how the reflected pulse travels and whether it is inverted.
Free-end pulse reflection
Free-end pulse reflectionSchematic: an upward pulse returns without inversion from a free end. Not measured data.λ = 1 mA = 0.04 m← Position along rope (m)Displacement (m)Schematic; no measured data.

Schematic: an upward pulse returns without inversion from a free end. Not measured data.

  1. Identify the boundary
    The system is the pulse and rope, and the free end is the boundary. Take right as positive. The incident pulse moves right toward the end.
  2. Apply the free-end rule
    A free end can move, so the reflected pulse is not inverted. It travels back to the left, opposite to the incoming direction, while remaining an upward pulse.
    v⃗r=−v⃗i\vec v_r=-\vec v_i
Answer: The reflected pulse travels left and remains upward; it is not inverted.
Check: The direction reverses at the boundary, while the free-end rule preserves the pulse's orientation.

Worked example

Finding a wall's distance from an echo

A sound travels through air at 340 m/s340\ \mathrm{m/s}. An echo returns to the listener 0.80 s0.80\ \mathrm{s} after the sound is made. Find the distance to the wall.
Echo from a wall
Echo from a wallSchematic path: sound travels outward and returns after reflection. No measured data are shown.λ = 2 mA = 1 m← Position along sound path (m)Displacement (arbitrary units)Schematic; values in the problem are hypothetical.

Schematic path: sound travels outward and returns after reflection. No measured data are shown.

  1. Define the path and unknown
    The system is sound travelling through air to a wall and back. Use the wall as a stationary reference. Let the outward direction be positive. The unknown is the one-way distance to the wall; the given time covers both trips.
  2. Calculate the round-trip distance
    The sound travels at the stated speed, so total distance equals speed multiplied by elapsed time. The units reduce to metres.
    dtotal=(340 m/s)(0.80 s)=272 md_{\text{total}}=(340\ \mathrm{m/s})(0.80\ \mathrm{s})=272\ \mathrm{m}
  3. Find the one-way distance
    The outward and return paths have the same length, so divide the total distance by two. Report two significant figures, matching the given time.
    dwall=272 m2=1.4×102 md_{\text{wall}}=\frac{272\ \mathrm{m}}{2}=1.4\times10^2\ \mathrm{m}
Answer: The wall is approximately 1.4×102 m1.4\times10^2\ \mathrm{m} away.
Check: The units are metres. Sound covers 272 m272\ \mathrm{m} in total during 0.80 s0.80\ \mathrm{s}, so a wall about half that distance away is reasonable.

Common mistakes and how to avoid them

Measuring the angle of incidence from the surface.
Correction: Measure it from the normal, which is perpendicular to the surface.
Saying a reflected pulse always turns upside down.
Correction: A fixed end inverts a pulse; a free end does not.
Using the full echo travel distance as the wall distance.
Correction: The echo travels to the wall and back, so divide total distance by two.
Treating the medium's particles as travelling along with the wave.
Correction: Particles move locally as the disturbance propagates through the medium.

Lesson summary

  • Reflection occurs when a wave returns from a boundary into its original medium.
  • At a flat boundary, the reflected angle equals the incident angle when both are measured from the normal.
  • A fixed rope end reflects a pulse inverted; a free end reflects it without inversion.
  • Echo time covers both the outward and return paths.

Check your understanding

Question 1

A wave strikes a flat boundary at an angle of 35∘35^\circ to the normal. What is its angle of reflection?
  1. 35∘35^\circ
  2. 55∘55^\circ
  3. 70∘70^\circ
  4. 145∘145^\circ
Show answer and explanation
35∘35^\circ
The law of reflection makes the reflected angle equal to the incident angle, with both measured from the normal.

Question 2

What happens to an upward pulse reflecting from a free end?
  1. It returns downward.
  2. It returns upward.
  3. It continues through the end without reflecting.
  4. It stops at the end.
Show answer and explanation
It returns upward.
A free end reflects the pulse without inversion, so an upward pulse returns upward.

Question 3

An echo returns after 0.60 s0.60\ \mathrm{s}. If sound travels at 340 m/s340\ \mathrm{m/s}, how far away is the reflecting surface?
  1. 102 m102\ \mathrm{m}
  2. 204 m204\ \mathrm{m}
  3. 340 m340\ \mathrm{m}
  4. 567 m567\ \mathrm{m}
Show answer and explanation
102 m102\ \mathrm{m}
The sound travels 340×0.60=204 m340\times0.60=204\ \mathrm{m} in total. The one-way distance is half, or 102 m102\ \mathrm{m}.

Key terms

Mechanical wave
A travelling disturbance that transfers energy through matter.
Boundary
A place where a medium ends or meets another material.
Reflection
The return of a wave from a boundary into the medium it came from.
Normal
An imaginary line perpendicular to a surface at the point where a wave meets it.
Inversion
A reversal of a pulse's orientation, such as an upward pulse returning downward.
Echo
Sound heard after it reflects from a surface and returns.

Continue through Physics 20

View the complete Physics 20 Alberta Grade 11 Physics curriculum and lessons

Tutor support for 20-D2.7k · Explain reflection of mechanical waves

Working on 20-D2.7k · Explain reflection of mechanical waves in Physics 20? Bring the question and your own attempt. In a live session, you can sketch the situation, name the quantities and check the units. Ask about the first step that does not make sense, then try a similar question yourself.

Explore physics tutoring · Request an eligible free 30-minute introduction. Your request is matched by subject and language; a tutor must accept before a time is confirmed.

برای مبحث 20-D2.7k · توضیح بازتاب موج‌های مکانیکی در درس Physics 20، سؤال و تلاش خود را همراه بیاورید. در جلسه می‌توانید موقعیت را رسم کنید، کمیت‌ها را نام ببرید و یکاها را بررسی کنید. راهنمای معلم فیزیک را ببینید یا جلسهٔ معارفهٔ رایگان ۳۰ دقیقه‌ای درخواست کنید. زمان جلسه پس از پذیرش معلم قطعی می‌شود.

About this lesson and its review

Published by DoAssignment. This reviewed lesson follows Alberta Grade 11 Physics (Physics 20), expectation 20-D2.7k. It is a study resource, not an official curriculum publication.

Before publication, content is checked for structure, mathematical or chemical notation, calculations, course boundaries, and readability. Errors can still occur, so corrections are welcomed.

Official curriculum reference

Report a correction or ask a question