DoAssignment study guide

20-D2.4k · Define wavelength, speed, period, frequency, amplitude, wavefront, and ray

Learn to define wavelength, speed, period, frequency, amplitude, wavefront, and ray through clear examples and targeted practice.

Alberta Grade 11 Physics

Oscillatory Motion and Mechanical Waves

Wavelength, speed, period, frequency, amplitude, wavefront, and ray

A mechanical wave is a disturbance that travels through a material, such as a rope or water. The material is the medium. In a simple wave, parts of the medium move while the disturbance travels through it. We will describe a wave using quantities that can be observed or calculated. First set the frame: the system is the wave and its medium, viewed from a stationary position beside the medium. For a rope wave, choose the direction along the rope as positive to the right. A vector has size and direction; wave speed is a scalar, so it has size but no direction. The direction of travel can be stated separately.

What you will learn

  • Define wavelength, wave speed, period, frequency, and amplitude using clear language and SI units.
  • Explain how a wavefront and a ray represent different features of a wave.
  • Use the relationships between wavelength, speed, period, and frequency in simple examples.

Reading a wave pattern

A schematic wave diagram can help locate repeated features. The line shows the medium's shape at one instant; it is not a record of the path followed by the wave. A crest is a high point, and a trough is a low point. These terms describe the shape of a transverse wave, where the medium moves across the direction the wave travels.
Wavelength is the distance between matching points on consecutive cycles. For example, measure from one crest to the next crest, or from one trough to the next trough. Wavelength is a length, so its SI unit is the metre, m. It is often written as λ\lambda.
Amplitude is the greatest displacement of a point in the medium from its undisturbed, or rest, position. Displacement tells how far and in which direction that point is from its rest position. Amplitude is a distance and is measured in metres. It is often written as AA. Amplitude describes the size of the medium's oscillation, not the distance the wave travels.
  • Wavelength measures one full repeating length of the wave pattern.
  • Amplitude measures the greatest displacement from the rest position.
  • Both wavelength and amplitude have SI units of metres.

Describing change over time and distance

Period is the time for one complete cycle at a point in the medium. For example, it is the time between one crest passing a fixed point and the next crest passing that same point. Period is a time and is measured in seconds, s. The symbol TT is commonly used.
Frequency is the number of complete cycles passing a point in one second. Its SI unit is the hertz, Hz; one hertz means one cycle per second. Frequency is often written as ff. Period and frequency describe the same repeating motion from different viewpoints: a long period means fewer cycles each second, while a short period means more cycles each second.
Wave speed is the distance the wave disturbance travels per unit time. It is a scalar measured in metres per second, m/s. The speed is not the speed of a particular piece of the medium moving up and down. For a wave with a repeating pattern, speed, wavelength, and frequency are related: in one period, the pattern advances one wavelength. This gives the relationship v=λfv=\lambda f. Since frequency is the number of cycles per second, multiplying it by the distance per cycle gives distance per second.
The period and frequency are reciprocal quantities: f=1/Tf=1/T. This means a period of two seconds corresponds to half a cycle per second. Use seconds for period and hertz for frequency so the units match the meaning.
v=λf,f=1Tv=\lambda f,\qquad f=\frac{1}{T}
  • Period is the time per cycle; frequency is cycles per second.
  • Wave speed is a scalar, while the direction of travel is stated separately.
  • For a repeating wave, v=λfv=\lambda f and f=1/Tf=1/T.

Wavefronts and rays

A wavefront is a line or surface joining points on a wave that are at the same stage of their cycle. On a diagram of circular ripples spreading across a flat surface, each circular crest can be drawn as a wavefront. A wavefront shows the pattern's shape at a particular time.
A ray is a line used to show the direction in which a wave travels. It is drawn perpendicular to the wavefronts in a simple diagram. A ray is a representation, not a physical string or path that the wave is required to follow. It helps show direction without drawing every detail of the wave.
Wavefronts and rays give different information. A set of wavefronts shows the repeated shape and spacing. A ray shows the direction of travel. A drawing of either is a schematic model; it is not experimental evidence. To claim measured evidence, someone would need to make and report observations.
  • A wavefront joins points at the same stage of the cycle.
  • A ray represents the direction of wave travel.
  • A ray is perpendicular to wavefronts in a simple wave diagram.

Choosing and using wave quantities

Before using a relationship, identify what each number describes. A distance between neighbouring crests is a wavelength, not an amplitude. The elapsed time for a single cycle is a period, not a frequency. Keep units with values while calculating.
The wave relationships are useful because they connect descriptions of the same repeating pattern. If wavelength and frequency are known, their product gives speed. If period is known, its reciprocal gives frequency. A final check should ask whether the units are correct and whether the result fits the description. For example, a frequency below one hertz means fewer than one cycle passes each second.
[v]=m/s,[λ]=[A]=m,[T]=s,[f]=Hz[v]=\mathrm{m/s},\quad [\lambda]=[A]=\mathrm{m},\quad [T]=\mathrm{s},\quad [f]=\mathrm{Hz}
  • Match each given value to its definition before substituting.
  • Check units and interpret the answer in words.

Worked example

Finding frequency from period

A point on a rope completes one cycle in 0.40 s0.40\ \mathrm{s}. Find its frequency.
  1. Identify the quantities
    The system is one repeating point on the rope, viewed from the stationary observer. The given period is T=0.40 sT=0.40\ \mathrm{s}. The unknown is frequency, ff.
  2. Use the reciprocal relationship
    Frequency counts cycles per second, so it is the reciprocal of seconds per cycle. Substitute the period and keep its unit in the calculation.
    f=1T=10.40 s=2.5 Hzf=\frac{1}{T}=\frac{1}{0.40\ \mathrm{s}}=2.5\ \mathrm{Hz}
Answer: The frequency is 2.5 Hz2.5\ \mathrm{Hz}.
Check: The units are reciprocal seconds, which are hertz. A frequency of 2.5 Hz means 2.5 cycles pass each second, consistent with a cycle taking 0.40 s.

Worked example

Finding speed from wavelength and frequency

A schematic repeating wave has wavelength 0.80 m0.80\ \mathrm{m} and frequency 3.0 Hz3.0\ \mathrm{Hz}. Find its speed.
Schematic repeating wave
Schematic repeating waveSchematic only; it shows wavelength and amplitude, not measured data.λ = 0.8 mA = 0.2 m→ Distance along medium (m)Displacement (m)Schematic, not measured data.

Schematic only; it shows wavelength and amplitude, not measured data.

  1. Set the frame and known values
    The system is the repeating disturbance in the medium, observed from a stationary position. Take right as the positive direction of travel. The given quantities are wavelength λ=0.80 m\lambda=0.80\ \mathrm{m} and frequency f=3.0 Hzf=3.0\ \mathrm{Hz}. The unknown is speed, vv.
  2. Relate speed to wavelength and frequency
    Each cycle advances the pattern by one wavelength. Three cycles pass each second, so the pattern advances three wavelengths per second.
    v=λf=(0.80 m)(3.0 s−1)=2.4 m/sv=\lambda f=(0.80\ \mathrm{m})(3.0\ \mathrm{s^{-1}})=2.4\ \mathrm{m/s}
Answer: The wave speed is 2.4 m/s2.4\ \mathrm{m/s}, toward the right.
Check: Metres multiplied by cycles per second gives metres per second; cycles are counts and have no unit. The answer is reasonable because the pattern advances 0.80 m for each of 3.0 cycles per second.

Worked example

Reading wavelength and amplitude

On a schematic wave, a crest is at +0.12 m+0.12\ \mathrm{m} displacement and the next crest is 1.6 m1.6\ \mathrm{m} farther along the medium. Find the wavelength and amplitude, assuming the wave's rest position is zero displacement.
Schematic wave dimensions
Schematic wave dimensionsSchematic only; the labelled dimensions are hypothetical values from the question.λ = 1.6 mA = 0.12 m→ Distance along medium (m)Displacement (m)Hypothetical values supplied in the problem; schematic, not measured data.

Schematic only; the labelled dimensions are hypothetical values from the question.

  1. Identify the repeating points
    The two crests are consecutive matching points, so the distance between them is one wavelength. The system is the wave pattern in the medium. Choose right along the medium as positive; the stated separation is a positive distance.
    λ=1.6 m\lambda=1.6\ \mathrm{m}
  2. Measure the greatest displacement
    Amplitude is the greatest distance from rest position, not the distance between two crests. With rest position at zero and crest displacement at positive 0.12 m, the amplitude is the magnitude of that displacement.
    A=∣+0.12 m∣=0.12 mA=|+0.12\ \mathrm{m}|=0.12\ \mathrm{m}
Answer: The wavelength is 1.6 m1.6\ \mathrm{m} and the amplitude is 0.12 m0.12\ \mathrm{m}.
Check: Both quantities are lengths, so metres are appropriate. The wavelength is larger than the amplitude, which is consistent with the stated repeating spacing and crest displacement.

Common mistakes and how to avoid them

Calling the distance from a crest to the rest position the wavelength.
Correction: That distance is the amplitude. Wavelength is measured between consecutive matching points, such as crest to crest.
Treating frequency as the time for one cycle.
Correction: Time per cycle is period. Frequency is cycles per second, and the two are reciprocals.
Saying the medium's particles travel along with the wave at wave speed.
Correction: Wave speed describes the travelling disturbance. Amplitude describes the displacement of points in the medium.
Treating a ray as a wavefront.
Correction: A wavefront joins points at the same stage of a cycle. A ray shows the direction of travel.

Lesson summary

  • Wavelength is the distance between consecutive matching points; amplitude is the greatest displacement from rest.
  • Period is time per cycle, measured in seconds. Frequency is cycles per second, measured in hertz.
  • For a repeating wave, f=1/Tf=1/T and v=λfv=\lambda f.
  • Wave speed is a scalar. State the travel direction separately.
  • A wavefront represents points at the same stage of a cycle; a ray represents direction of travel.

Check your understanding

Question 1

A wave completes one cycle in 0.25 s0.25\ \mathrm{s}. What is its frequency?
  1. 0.25 Hz0.25\ \mathrm{Hz}
  2. 4.0 Hz4.0\ \mathrm{Hz}
  3. 4.0 s4.0\ \mathrm{s}
  4. correctIndex_1? 0
Show answer and explanation
4.0 Hz4.0\ \mathrm{Hz}
Frequency is the reciprocal of period: f=1/(0.25 s)=4.0 Hzf=1/(0.25\ \mathrm{s})=4.0\ \mathrm{Hz}.

Question 2

Which distance represents wavelength?
  1. The greatest displacement from rest position
  2. The distance from a crest to the next crest
  3. The distance the medium travels in one second
  4. correctIndex_1? 1
Show answer and explanation
The distance from a crest to the next crest
Consecutive crests are matching points in the repeating pattern, so their separation is one wavelength.

Question 3

What does a ray show in a simple wave diagram?
  1. The greatest displacement of the medium
  2. The time for one cycle
  3. The direction in which the wave travels
  4. correctIndex_1? 2
Show answer and explanation
The direction in which the wave travels
A ray represents direction of travel and is drawn perpendicular to the wavefronts.

Key terms

Amplitude
The greatest displacement of a point in the medium from its rest position; measured in metres.
Frequency
The number of complete cycles passing a point each second; measured in hertz.
Period
The time for one complete cycle; measured in seconds.
Ray
A line representing the direction in which a wave travels.
Wave speed
The distance a wave disturbance travels per unit time; measured in metres per second.
Wavefront
A line or surface joining points on a wave that are at the same stage of their cycle.
Wavelength
The distance between consecutive matching points on a repeating wave; measured in metres.

Continue through Physics 20

View the complete Physics 20 Alberta Grade 11 Physics curriculum and lessons

Tutor support for 20-D2.4k · Define wavelength, speed, period, frequency, amplitude, wavefront, and ray

Working on 20-D2.4k · Define wavelength, speed, period, frequency, amplitude, wavefront, and ray in Physics 20? Bring the question and your own attempt. In a live session, you can sketch the situation, name the quantities and check the units. Ask about the first step that does not make sense, then try a similar question yourself.

Explore physics tutoring · Request an eligible free 30-minute introduction. Your request is matched by subject and language; a tutor must accept before a time is confirmed.

برای مبحث 20-D2.4k · تعریف طول موج، تندی، دوره، بسامد، دامنه، جبهه موج و پرتو در درس Physics 20، سؤال و تلاش خود را همراه بیاورید. در جلسه می‌توانید موقعیت را رسم کنید، کمیت‌ها را نام ببرید و یکاها را بررسی کنید. راهنمای معلم فیزیک را ببینید یا جلسهٔ معارفهٔ رایگان ۳۰ دقیقه‌ای درخواست کنید. زمان جلسه پس از پذیرش معلم قطعی می‌شود.

About this lesson and its review

Published by DoAssignment. This reviewed lesson follows Alberta Grade 11 Physics (Physics 20), expectation 20-D2.4k. It is a study resource, not an official curriculum publication.

Before publication, content is checked for structure, mathematical or chemical notation, calculations, course boundaries, and readability. Errors can still occur, so corrections are welcomed.

Official curriculum reference

Report a correction or ask a question